Find the power parameters of this lamp. What is the motivation? What should I pay attention to when installing?

The picture is not clear. If it is a metal halide lamp, there are also metal halide lamps of this type.

I saw a kind of lamp like the one below, I don't know if it is.

Par64 stage lamp cabinet

LEDPAR64

Power input: AC110v ~ 250v 50 ~ 60hz.

Insurance: 3A

Power: 18W

Color: black/white

Size: 22.5 * 22.5 * 22.5*22.5*33.5cm

Net weight:1.3kg.

Gross weight:1.5kg.

LED type:181151177pcs10mm led.

Luminous angle: 18/26/35 degrees

Life: 8000- 10000 hours.

Operation menu: DIP dial/digital tube button

Control mode: DMX5 12, voice control, self-propelled, stroboscopic, monochrome, master-slave and dimming.

DMX5 12 channel: DIP dial 4CH/ DIP dial 5CH/ digital tube key 4CH/ digital tube key 6CH.

The installation guide is not clear. I hope it helps you.

1. Investigation of performance venue: including power supply system, distance and location, production conditions, suspension system and conditions, available site conditions, etc. Considering the minimum size of the entrance of the performance venue, the disassembly and assembly of large lighting equipment should be considered.

2. Confirm the power supply and capacity. Before installing the stage, you should know the power supply equipment of the theater in detail. The number and power of lighting lamps should be designed within the rated power supply range, and the three-phase current should be balanced as much as possible.

3, the choice of lamps and lanterns. According to the area of the space scene, projection distance, character modeling and lighting requirements of the plot, projection lamp is selected, and the number of required equipment is listed.

1) spotlight: (protruding) Iens Spotlight places a lens in front of the lamp, focuses the light on the stage, and adjusts the position of the light source to the lens to adjust the size of the projection aperture. The brightness is low when the projection aperture is large, and high when the projection aperture is small. Tungsten halogen bulbs are commonly used as light sources, and 500w/ 1000w/2000w are commonly used as stage spotlight products at home and abroad. Spotlights with different powers have a certain projection distance and brightness value. The kind of light bulb determines the color temperature of the light source. The type and quality of the condenser lens also affect the quality of the projected light.

2) spotlight: (thread) Fresnel spotlight can also be called soft light spotlight. Compared with convex lens spotlight, Fresnel thread spotlight can obtain softer aperture and modeling light effect. In the application of stage lighting, the connection of threaded spotlight and threaded spotlight aperture can obtain uniform lighting projection effect on the stage.

3) Return light: The return light of the beam projector depends on the spherical reflector to project the light emitted by the electro-optic onto the stage. The light projection effect is strong, the light projection area is large, and the projection distance is farther than that of spotlight.

4) Floodlight: Floodlight lighting area is forest, without lens, and it relies on reflector to generate uniform light. The farther the direct illumination distance, the greater the loss of projection brightness.

5) Red light: red headlamp floodlight without lens, with parabolic reflector behind the horizontally installed iodine tungsten lamp tube, forming a uniform floodlight effect.

6)PAR lamp: PAR lamp/parabolic aluminized reflector /PAR tank PAR-64 lamp is a sealed halogen bulb with a standard color temperature of 3,200 degrees, which integrates light source, reflector and lens. It has a parabolic closed reflector inside, which can achieve better lighting and modeling effect than spotlight. The front end of the bulb is designed as an integrated lens, including light transmission type and soft light type. Another kind of low-voltage PAR lamp bulb, called ACL (AIR CRAFT LANDING), originated from the headlamp light source of aircraft. Compared with ordinary PAR lamp, it can obtain smoke effect and make the beam projected by PAR lamp more visible.

7) Imaging lamp: Elliptical reflector spotlight, also known as modeling lamp, can place a hollowed-out projected metal logo at the focal position of the lamp, and the light source can project various modeling effects through ellipsoidal reflector and condenser. At present, the famous products are (American) ETC-SOURCE FOUR, (British) ADB, STRAND LIGHTING, (Japanese) MARUMO-RIKURI and other brands.

8) Modeling sheet: The location of Godo template imaging modeling sheet is at the focus of light source convergence. Therefore, it is usually made of high-temperature resistant stainless steel or aluminum alloy plates, and the manufacturing methods can be computer carving, chemical etching and manual carving.

9) Selection and use of various effect light or computer lights:

10) necessary spare lamps and lanterns, etc.

4, cable and wiring preparation (according to the power load) choose to use rubber double sheath cable, cable plug intact without disconnection.

1) main power supply-distance from power consumption area/cable power supply capacity-voltage drop loss/wiring scheme: a grounding arrangement and necessary protective measures. B overhead layout. Treatment of vehicle passage. D waterproof and rainproof measures. E grounding protection device, etc.

2) Switch control cabinet/three-phase electric air switch/leakage protection device/branch power distribution control/control cabinet rainproof measures, etc.

3) Selection of silicon controlled dimming lamp/configuration and use of circuit, capacity limitation/dimming table, operating position/rainproof measures, etc.

4) The sum of the current carrying capacity of each branch cable is consistent with the light distribution diagram, and the required cables are determined and listed according to the length (m) of the street lamp line. Branch cables with different sections and lengths can also be made according to the capacity of the dimming SCR box.

5) Before leaving the warehouse, the cable shall be electrified to check whether the connector is in good condition.

5. Preparation of color design and application.

1) Choose color filters and color temperature patches according to the plot of the scene characters' lights and the colors needed in time and space.

2) There is a special person who is responsible for making the outbound list of color films, sizes and required quantities consistent with lamps.

3) In order to ensure the success of the performance, it is necessary to use color clips, which can effectively prevent the projection from leaking light.

6, auxiliary equipment and consumables

Make auxiliary equipment according to the needs of performance lighting design. Such as mobile lamp holders, chassis, aluminum tubes of suspenders, light hooks, safety ropes, traffic ropes, iron wires, various plastic belts and adhesive tapes, and various spare light bulbs.

7. Tools

Personal tools necessary for performance production: such as electric pen, pliers, cross screwdriver, flashlight, multi-purpose knife, wrench, etc. Other necessary tools: pressure pliers, hacksaws, wrenches, wire crimping pliers, wire crimping pliers, etc.

8, safety and labor protection

1) put an end to illegal business, and safe performance is the premise of sustainable development. Effective accident prevention measures should be formulated, including fire prevention, electric shock prevention, scald prevention, trauma prevention, falling prevention and collision prevention.

2) Personal work clothes, gloves, long-sleeved shirts, trousers, soft-soled shoes, tool kits, drawing clips and working caps, and put on work clothes before installation.

3) Prepare necessary safety emergency items and measures, such as band-AIDS, bandages and other simple medicines and medicine boxes.

4) Equipment safety protection measures: The installation position of waterproof materials, tarpaulins and tarpaulins, as well as the auxiliary production and construction of the disposal scheme should be considered.

5) Plywood and wood should be used for fire prevention treatment inside the light box, and fireproof paint should be painted.

6) Below the lamps, rectifiers, transformers and other electrical appliances close to wood or plywood, asbestos cloth should be padded.

7) Metal bracket devices suspended from temporary light frames, trusses, light chasing tables and other lamps shall be grounded.

8) During the intense work of loading and unloading platform, special attention should be paid to the safety of hanging objects under feet and overhead.

9. Set up a lighting production team

1) Arrange the number of people according to the schedule of the performance.

2) Determine the person in charge of installation and speak before installation. The person in charge of lighting design, stage design or stage installation will explain the matters needing attention and the stage installation sequence, be responsible for answering and coordinating relevant questions with the stage installation department, and guide the stage installation, lighting, landscape combination and performance management.

3) It is very important to cultivate and train the professional skills of performers, and we should pay attention to the experience of performance practice and improve the management level of performance production.

10, Final Work of Installation and Dismantling

The order of dismantling the performance stage is opposite to the order of installing the stage. Disconnect the power supply first and cooperate with other departments on the stage to dismantle the stage. In the meantime, more attention should be paid to preventing accidents.

1) After the power supply is cut off, the cables of all parts can be removed, and the ground lamps and lanterns can be removed, so as to ensure that the space and passages needed for dismantling the platform are unblocked, lower the suspenders of all parts, remove the lamps and lanterns suspended above, and dismantle the lamp stand, and arrange the wiring in turn.

2) After the lamps and equipment are dismantled, they should be assembled in appropriate places for classification, packaging and counting.

3) Restore the necessary positions of the equipment and scenery in the performance venue.

4) Personnel shall be responsible for supervising the incoming and outgoing equipment.

5) Maintain and hand over the site environment before evacuation, and define the responsibility and scope of removing performance garbage.

6) Before the personnel leave the performance venue, the person in charge of the site shall establish a final on-site inspection.

7) Return the equipment and materials to the warehouse, handle the return formalities according to the outbound order, and report the quantity of consumables and equipment loss.

Stage lighting:

Computer shake head lights, effect light, strongpoint, laser lights, range hoods, cigarette oil, movie lights, studio lights, blue headlights, red headlights, Yongfa ysd series, hbo series, xbo series, msd series, msi series, msr series, hmi series, hti series and other light sources, msr575, HMI 1200/

Stage lighting brand series:

Yidashi adb ace etc, Youtu macostar, marumo Marumo, Shibaoli spotlight, Quande strand, Lee Tae tl, phida.

Floodlight brand floodlight Duffy.

Computer lamp brand mobile lamp

Gemma Comar, Yi Dashi, Martin Martin, Renfeng Aseda, Caiyi Fine Arts, Valerie Wali Park Jung Su.

Focus brand focus

Shi Baoli spotlight, Shi Chuangqiang, Caiyi Fine Arts, Fei Da