Where can I change the battery of a natural gas cooker?

1. Where can I change the battery of the natural gas furnace?

The battery of the natural gas cooker is located at the bottom of the cooker and has a pop-up box. Just press hard, open the battery box, take out the old battery, replace it according to the corresponding model of the battery, and put it back in the original way. Be sure to distinguish the positive and negative poles, otherwise it will damage the circuit of the cooker.

Second, what are the precautions for natural gas stoves?

1, when you buy it, you must ensure that the gas source used at home is the same as the gas source used for the cooker you bought, otherwise it cannot be used.

2. In order to ensure the safe operation of the cooker, we must buy quality-guaranteed pressure reducing valves and gas pipes produced by regular manufacturers.

When using the gas stove, someone must look after it. If the gas stove leaks, please turn off the power immediately, open the doors and windows and ventilate. You can't use electric fans and range hoods to exhaust gas, and you can't use electrical switches.

4. The room where the gas stove is used must be well ventilated, and flammable items cannot be placed around it. The top of the stove should be greater than 1m, and the distance between the edge of the stove and the wall, furniture or other flammable items should be greater than 15㎝.

5. After using the gas stove, the temperature of the stove will be very high, so don't touch the gas stove with your hands to avoid burns.

6. Gas stoves must be maintained on time. Take good care of cooking utensils and keep the stove clean; Decontamination shall be done in time, water stains shall be dried, and the exhaust hole on the cooker head shall be dredged with small iron wire in time to avoid blockage. The thermocouple shall be wiped at any time to remove the oxide accumulated on the thermocouple or dirt that hinders heat transfer, so as to keep the cooker clean, keep the gas flowing and keep the cooker in a good heating state.

Summary: The above is what Bian Xiao introduced about the difference between zero line and ground line. I hope it can help everyone. Presumably, everyone knows something after reading it! If you want to know more relevant information, please pay more attention to Qijia. It will provide you with more complete, detailed and up-to-date information.