How to drill wood for fire is the easiest.

The easiest way to drill wood for fire is as follows:

The first one: the classical method of drilling wood for fire.

This is the most well-known but also the most difficult method. First of all, find the right wood drilling board, dried poplar, willow and so on. Will be a good choice, because their texture is soft. Then find a suitable branch as a drill bit, which is hard and the conditions are not as harsh as the drilling board.

Then, drill an inverted V-shaped groove on the edge of the drilling plate. Finally, put a flammable tinder or dead leaves under the drilling board, and then drill hard with both hands until a fire comes out.

The second type: the classic double drilling method.

Other steps are the same as the first method, only this time two people cooperate. One person fixes the drill shaft on the drill floor with a wooden cover with grooves, and the other person wraps a rope or rattan with high friction around the drill shaft several times, and then pulls it back and forth quickly. This two-person cooperation is much more efficient than the first one.

The third type: simple plane fire method.

Dig a long slot in the cork board, put flammable and combustible materials in front of the slot, and push it forward with hardwood strips until Mars ignites the combustible materials.

The fourth kind: Iroquois kindling method.

This device invented by Iroquois is very effective. One end of the drill shaft is wound with two ropes, and the other ends of the ropes are respectively fixed on the hard cross plate. A hard wooden wheel is used as an accelerator in the middle of the drill shaft. When winding rope, press down the cross plate hard, so that the drill shaft produces extremely fast speed, and then drill sparks.

Fifth: Bow string drilling method

It is similar to the second double-person wood drilling method, but it can be done by one person. There is also a slotted cover on the drill shaft, and then it is pulled quickly with a bowstring-like tool.

Sixth: the classic fire preservation method in the cave age.

Whether it is drilling wood for fire or other methods, suitable medium is needed to cooperate with the combustion of fire. When the surrounding environment is very humid, ordinary materials are difficult to ignite.

Make it into a bird's nest shape with dry materials, hollow it out in the middle, try to keep it soft, and then pad it with a layer of tinder. In this way, even in wet weather, you can catch fire when you meet Mars.

Seventh: flint method

This kind has no technical content. It uses flint to strike hard materials such as steel knives and granite. Flint pad with flammable materials or burnt cloth, a blow will hit.

One thing to note here: the more edges and corners of the stone, the better the effect of flint. When the edge of a hard stone is too smooth, it needs to be broken on a big stone, so as to show sharp edges.