How to choose the clothes rack for the installation steps of double-pole clothes rack?

There are many kinds of clothes hangers, which can be classified according to their size or design. Common clothes racks include folding clothes racks or floor-standing clothes racks and electric lifting clothes racks, and may also be similar to the double-column clothes racks shown below. So what is a double-pole hanger? From the example of Bian Xiao, we can know that, as the name implies, they have two clothes drying poles, which can dry more clothes at a time. The common double-pole clothes drying racks are all equipped with hand cranks and some spare parts such as pulleys and wire ropes, so that we can carry out lifting operations. Please refer to the following for details. We also give you some reference skills and suggestions in the process of purchasing clothes racks, which I believe can be used at some critical times.

1. Installation steps of double-pole clothes hanger

1. Find the installation position of the hand crank and punch it: it is suggested that the height of the hand crank is 1M- 1.2M from the ground, and then determine the position of the corner crank (note: the position of the corner crank must be perpendicular to the position of the hand crank, and the red circle is the installation position of the hand crank).

2. Next, determine the positions of the four pulley frames: the distance between the two sides of the pulley frame and the wall is not less than 27CM, the vertical distance between the two pulleys is not less than 45CM, and the horizontal distance between the two pulleys is 18CM or 2M, generally 2 m. The specific pressing position depends on the actual situation of the household balcony. After the installation position is determined, use the pulley frame to determine the punching position. Next, install expansion screws on the pulley frame: one ***4, two single pulley frames and two double pulley frames. Similarly, install two expansion screws on the corner adjuster.

3. Start to install the hand crank: fix the hand crank with expansion screws, then tighten the expansion screws with tools, install the handle, tighten the screws on the handle, and then shake out all the wire ropes in the hand crank. When shaking out the wire rope, it is necessary to pull the wire rope to avoid wire disorder until the handle can't turn (this function is unique to life and has anti-shake braking function). Pull out the other wire rope in the same way, as described above. Note: There are two wire ropes in the crank handle. Push the handle to control the left and pull it out to control the right.

4. Next, start threading the wire rope: open the package, which contains two wire ropes with the same length. First, hold both ends of the wire rope and thread it into one of the corner devices. Then, pass both ends of the wire rope through one of the double pulley frames. The two wire ropes are parallel and not twisted. Pull one end of the wire rope from the bottom of the double pulley frame to the position close to the crank, and pull the other end through the angle adjuster. The other wire rope operates in the same way as the previous one. Then, shake the button at one end of the wire rope out of the crank. Install the fixing cover.

5. Rope threading: Next, thread the two long steel ropes on the double pulley onto the other two single pulleys, and install the fixing cover as well. Cut the rope flat: Next, cut the four ends of the wire rope flat, the height is about above the crank, then install the lifting rings, then put the four lifting rings on the two ends of the two drying rods, and then put the hanging earplugs on the two ends of the drying rods, thus completing the installation of the double-rod drying rack.

6. Assembly: Install the last two groups of small accessories, so that the whole double-column hanger is installed.

Second, how to choose a drying rack?

Introduction 1: Watch the tightrope

Look at its thickness and elasticity. The thicker and softer the wire rope, the better. The identification method is to fold the wire rope in half and put it aside to see if it can be restored.

Introduction 2: Look at the pulley

Pulleys are made of ordinary metals, even iron and copper. The product quality made of pure copper composite pulley is better, and moving pulley is more labor-saving.

Raiders 3: Look at the thickness of the drying rod

Buying a hanger rod is not as thick as possible, but moderate. A pole that is too thick is too heavy to lift. The pole thickness should be moderate, and the thickness from 1.0 to 1.2mm is more suitable.

Raiders 4: Look at the surface of the pole

The surface treatment of drying rod mainly includes polishing treatment, electroplating treatment, plastic spraying treatment and electrophoresis treatment. Electrophoresis treatment process is the most complicated, and the surface of the rod is very bright and the grade is the best. Polishing treatment is the simplest and belongs to low-end products. The surface of this rod looks bright, close to the primary color of aluminum alloy, but it has not been treated with any surface oxidation resistance. After a long time, the surface of the rod will turn black.

Introduction 5: Look at the crank.

The crank handle is the core component of the clothes hanger, which is very critical. When you buy it, you should turn the handle directly to see if it is smooth and the noise will be too loud.

Introduction 6: Look at the expansion screw

Expansion screws are often ignored by consumers, which actually determines whether the product is easy to install and firm.

Raiders 7: look at the material of the drying pole.

At present, there are stainless steel, Al-Mg alloy and Si-Mg-Ti-Al alloy on the market. Consumers should distinguish between materials. First, pay attention to the description of the merchants and choose the merchants with good reputation. Second, pull both ends of the lever directly. Aluminum alloy bends easily and cannot be repaired, while titanium alloy does not.

The above not only recommended the skills of hanger selection for everyone, but also gave the installation steps of double-column hanger for everyone. From this, we can know that, first of all, the common clothes hangers may be folding clothes hangers or electric clothes hangers, that is, the so-called lifting clothes hangers. We can change the height of the double-column clothes hanger by controlling the rotation of the crank, which greatly facilitates the later housework and improves the efficiency.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~