Course of air conditioning installation method

The air conditioning installation method tutorial is as follows:

Tools/materials: Xiaomi air conditioner N 1A 1 (indoor and outdoor machines), pipes, nail guns, electric drills, level meters, screwdrivers, wrenches, vises, etc.

1. First measure the height of the mounting bracket with a measuring ruler, as shown in the figure below.

2. As shown in the figure below, remove the indoor unit bracket.

3. Predict the position of the underlined brackets first, as shown in the figure below.

4, according to the position of the line drawing, drilling, as shown in the figure below.

5. Fix the bracket firmly on the wall as shown in the figure below.

6. Drill holes with an electric drill first, as shown in the figure below.

7. Drill holes centered on small holes, as shown in the figure below.

8. Then use a screwdriver to remove the shell, as shown in the figure below.

9. Then pass the lines and pipes through the indoor unit, as shown in the figure below.

10. Wrap the pipeline with insulating tape, as shown in the figure below.

1 1. Then fix the indoor unit of the air conditioner on the wall, because the indoor unit has a certain weight, as shown in the following figure.

12. First, insert the pipe wrapped with insulating tape into the air conditioning hole, as shown in the figure below.

13. Then fix the indoor unit on the original bracket plate with screws, and fix it with plastic bracket, as shown in the following figure.

14, so the indoor unit is basically installed, as shown in the figure below.

15. Next, install and fix the outdoor unit. In order to prevent moisture, the outdoor unit is placed on the base, as shown in the following figure.

16. Then deal with the exposed pipes of the air conditioner and nail the trajectory of the embedded pipes on the wall, as shown in the figure below.

17. Then several air-conditioning pipes are wrapped with insulating tape and put into the track, as shown in the figure below.

18. Just cover it at last, so that the exposed air conditioning duct is hidden, as shown below.

19. Then, connect the pipeline with the outdoor unit and connect it with a wrench, as shown in the following figure.

20. Finally, power on and debug. In this way, the indoor unit is installed outside the air conditioner, as shown in the figure below.