How to shuffle the mahjong table

1, depending on whether the mahjong table has the function of hiding cards. If it doesn't, it won't fit in. If yes, you can try the following operations, which are generally the following steps, and some may be set differently for your reference.

2. Put a pair in first, and then wash the first card (generally, there will be an LED light near the LOGO on the color card, which means it is finished). Then press the deal key (usually 2) to push the other one in, and then press and hold the dice key (usually 4) on the color wheel at the same time, just press and hold the two diagonal keys for more than 3 seconds. When you hear the beep, let go, and the color wheel will automatically sink, so that both cards will be put in.

Extended data:

1. The surface layer on the back of mahjong tiles contains metals that can be attracted by magnetic force, such as iron, but not on the front. (The magnetic force should be like this. When the suction ring is facing the back of the mahjong tile, it can be sucked, but the strength is weakened when facing the front of the mahjong tile. ) Tiles rotate with the disk on an inclined disk. When the tile rises to a higher position, the tile with its back facing upwards is attracted by the iron ring above the disc.

2. There is a small spring on the disc to turn over the cards, so that the cards on the front are turned down, and the cards on the back are attracted by the iron ring until all the cards are finally sent to the slot and taken away. When there are enough cards on all sides, people will control the button and the tray under the cards will send the cards folded on all sides out of the table.

3. There are five motors on the full-automatic mahjong machine table to drive the turntable and the chain (with push rods on the chain) to rotate, which is automatically controlled by the electronic chip.

References:

Baidu Encyclopedia: Automatic Mahjong Table