How to tie the eight-character ring

The eight-character ring of fishing line group connects the main line and the auxiliary line, which plays a very important role in connecting. If the 8-ring connection is improper, it is very easy to break the line and run off.

1. Connection mode of main line and octagonal ring

First, the line end of the fishing line is folded through the hole of the splayed ring; Then fold one end of the fishing line back. In this process, be careful to hold three strands in your hand at the same time. Pass the 8-shaped ring under the side where the thread end extends and surround it. Note that it should be repeated 4 times here; Finally, pull the thread head and the thread body, and slowly pull it out, so that the fishing line is tightly tied to the figure-eight ring.

2. Connection mode of sub-line and splay ring

First, tie the fishhook to the sub-line, then adjust the hook distance, and fold the sub-line in half according to the hook distance; Tie a splayed knot in the folded part, as close as possible to the top of the dividing line; Then pass the folded sub-wire through the figure-eight ring, holding the wire in one hand and the smaller ring under the figure-eight ring in the other hand, turn the figure-eight ring several times, and then pass the head with the figure-eight knot under the ring, being careful not to pass through too many knots, as long as it can pass through; It is best to pull the double hook line and gently tighten the fishing line.