How to decorate Huangmeitian and what should I pay attention to?

Huangmeitian is not suitable for decoration.

It is not advisable to use wood with high moisture content.

Dry operation is not suitable before wet operation.

Cement floor should not be mixed with floor mortar.

It is not advisable to make wooden door covers first, and then caulk them.

After the wooden door cover is completed, it is not advisable to stick the decorative board.

It is not suitable to transport decorative materials that are susceptible to moisture in rainy days.

It is not advisable to open the window in rainy days.

The wall foundation is not suitable for painting.

Nitro varnish is not suitable for rainy days.

Milky yellow or dark wall paint should not be selected.

First, don't trample the floor tiles immediately after paving. When laying floor tiles, plastered cement will be affected by air humidity, which will slow down the setting speed. Therefore, after the floor tiles are laid, you can't step on them immediately. A springboard should be set up to facilitate the passage.

Second, the floor is covered with moisture-proof film. If you don't pay attention to the floor, it will easily become warped in the future. Therefore, the cement floor on which the floor is laid should be kept dry, and an effective partition treatment method should be adopted at the junction of dry and wet. If you choose composite laminate flooring or solid wood composite flooring, you need to lay a moisture-proof film. Because the pressed floor directly contacts the ground during installation, there is no extra space to block moisture, and because of the physical characteristics of its wood, it is easy to cause the deformation of the floor. Solid wood flooring does not necessarily need to be covered with moisture-proof film, because the installation of solid wood flooring requires keel on the ground, so there will be a certain space between the ground and the floor to block moisture.

Third, the ceiling In order to prevent the ceiling from cracking, high-quality gypsum boards must be selected, and try not to transport them in rainy days. In order to control the moisture content of gypsum board, it should be fully enclosed during transportation. The gap of gypsum board should not be less than 0.5-0.8 mm, and should be embedded with materials of the same quality. The joints between ceiling keel and gypsum board should be staggered.