How does the air conditioner remote control modulate the thermal mode?

Air conditioning remote control adjustment thermal mode:

1. First, turn on the air conditioner and press the "On/Off" button on the remote control.

2. Click "Mode" of the remote control and select the heating mode. At this point, the small arrow on the display screen of the remote controller points to "heating". A heating icon will also appear on the air conditioner display. Press the up and down keys to adjust the required temperature.

3. The air conditioner starts to operate, and it takes a long time to prepare for the heating mode, and it will take a while. If the air conditioner doesn't blow for a long time, check whether the wind speed is too low or the tuyere is not facing down, and press "Swing Wind" and "Wind Speed" on the remote control to adjust. If there are still problems, it is recommended to find specialized personnel to repair them.

What if the air conditioner is not hot?

1. There is something wrong with the air conditioner capillary or check valve. The solution to this problem is to replace the capillary or one-way valve to solve the problem that the air conditioner does not heat.

The outdoor temperature is too low. If the outdoor temperature is too low, the air conditioner will not work normally. Generally, the outdoor temperature is below zero, and the outdoor temperature of inverter air conditioner is below zero 15 degrees, so it may be that the outdoor temperature is too low, the air conditioner cannot defrost, and the air conditioner cannot heat. Then you need to clean the frost on the air conditioner with tools to solve the problem that the air conditioner is not hot.

3. The air conditioner four-way valve leaks. The four-way valve needs to be replaced to solve the problem that the air conditioner does not heat.