What should I put in my world industry 2 industrial pump grid?

A fluid/solid canning machine can be placed to pump water.

Related introduction:

Pumps can be used for many purposes, such as steam engines and ore washers. All of them need pumps, and the main function of pumps is not to use buckets to fill water one by one, thus realizing automation in industry 2.

It can pump liquid in any direction. The fluid in the third unit can be pumped every two squares. As long as the front port is in contact with the fluid and there is the same liquid or no liquid inside, the fluid can be pumped.

The liquid extracted from the container by the fluid/solid canning machine will enter the water tank on the right. When thickening liquid, you need the left water tank, so you need to use industrial pump and liquid injection to upgrade, or right-click the left side of the machine with a general fluid unit.

Extended data

In the game, use a wrench or an electric wrench to adjust the direction of the pump pumping fluid. Only after the installation fluid is ejected and upgraded can the fluid be automatically exported. Pumping 1000mb fluid requires 20EU power. According to the actual test, every 0.95eu/t, the pump can act as a stop for the fluid pipeline in the original industry 2, and it will explode at a speed of 1000mB/s and a maximum input voltage of 32 EU/t. Can be upgraded under high pressure.

Related props:

Liquid/solid canning machine:

It has four functions: canning, filling the fluid in the unit into the water tank, filling the fluid in the unit into the water tank, and mixing the fluid with the solid (water tank or unit). There are two liquid tanks. Support liquid pop-up upgrade.