How to install the water mixing valve of exposed sprinkler? What should I pay attention to when installing?

Now the development of the bathroom industry can be regarded as relatively rapid. Because today's young people yearn for the metropolis and want to find a sense of belonging in the metropolis, they must have a home here, a home of their own, so more and more people buy houses in the metropolis. In the decoration of the house, it involves the installation of bathroom products, and the exposed shower mixing valve is an essential product in our shower process, so we must choose it carefully. After the purchase, it involves the problem of how to install it. Let's learn about the installation method of the water mixing valve of the exposed sprinkler and some matters that should be paid attention to during installation.

Exposed shower mixing valve-introduction of installation steps

1. Please turn on the water source before installing the water mixing valve of surface mounted shower, and then turn off the water source to remove impurities and sand in the pipeline. Mainly to prevent the impurities in the water pipe from affecting the normal water supply after the water mixing valve is installed, so it is quite troublesome to rework and install it again.

2. Lock the flange cover of the exposed shower mixing valve into the teeth of the water inlet elbow, then wrap the teeth with leak-proof tape, lock them into the wall pipe, adjust the rotation angle of the cold and hot water inlet elbow until it is flush, and the hole spacing is the same as that of the body cold and hot water inlet, and then rotate the flange cover close to the wall, which is mainly used for fixing.

3. Insert the rubber washer of the exposed shower mixing valve into the connecting nut of the hot and cold water inlet of the main body, and then connect it with the elbow of the hot and cold water inlet for locking. Please use a 30 mm wrench.

Surface Mount Shower Mixing Valve-Installation Precautions

1. Before installing the water mixing valve of exposed sprinkler, ensure that the water pressure is between 0.5 and 5 kgf/cm, so as to ensure the normal water supply after installing the water mixing valve.

2. Please close the water inlet elbow (water source) and carefully remove it before removing the exposed water mixing valve body of the shower, so as not to damage the water mixing valve.

3. When using the surface-mounted shower mixing valve, please don't touch the water outlet to avoid burns.

4. When using the surface-mounted shower mixing valve, please do not disassemble the shaft.

5. When cleaning and maintaining the exposed shower mixing valve, do not use corrosive cleaning agent, and avoid brushing with plant cloth or decontamination powder to avoid damaging the surface of the product and affecting its service life. After cleaning, sponge off the water droplets on the surface.

Through the detailed introduction given to you above, I believe you should have a clear understanding and understanding of the installation of the water mixing valve of the exposed shower. Friends who don't know much but are curious, if you want to try it yourself, you might as well try to install an exposed shower mixing valve in the bathroom and follow the steps described above. I believe you will master it soon. Of course, we should also pay attention to some precautions mentioned above when installing, and strive for a one-time installation.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~