Summary of monthly work of construction engineering

Summary of monthly work of construction engineering

The busy and substantial work has come to an end. I believe everyone has gained a lot since this time. Let's sum up our past achievements into a work summary. So how is the general work summary written? The following is the monthly summary of construction projects I collected for you. Welcome to reading. I hope you will like it.

Monthly work summary of construction project 1 I came to xxxx project department in March of xxxx. This comrade can abide by the rules and regulations of the company and the project department where he works, actively obey the work arrangement of the leader, complete the assigned tasks, safeguard the collective honor, demand progress ideologically, actively respond to the company's call, and conscientiously implement the company's documents and meeting spirit. Work hard, work hard, study relevant knowledge seriously, and constantly enrich and improve yourself.

Have a strong sense of ownership, always pay attention to the development of the company, personally consider the interests of the company and the project department, firmly believe that the company will continue to grow and develop, and be full of enthusiasm and expectation for the future of the company.

No matter at work or in life, I always believe that no pains are rewarded, so I have been working hard, studying hard and working hard. Love your job, be able to treat every job correctly and seriously, be dedicated and love your post, get to work on time, make effective use of working time and stick to your post.

As the xxxx project is a foreign project, the biggest difficulty in the work is language communication. Without communication, the work can't be carried out at all. But I can still integrate into the work in a short time, work in the school, learn while doing, and gradually communicate with the construction party independently.

According to the actual situation of the project, I should not only supervise and guide the work of the local construction party on the spot, but also control the construction quality; It is also necessary to review the workload reported by the construction party in the office. During the peak period of construction, the workload is quite heavy, but I can still adhere to the principle, strictly demand the on-site construction unit, and resolutely demand the construction party to rectify the quality problems found in the construction process; For the technical problems in the construction process, we can discuss them with the construction party and find out the solutions. This work has certain foresight. For the problems that may be encountered in the construction process, we can promptly remind the construction party to pay attention and take corresponding effective measures to deal with or avoid the problems, so as not to fight an unprepared war.

In terms of workload accounting, accounting records can be made to prevent the construction unit from reporting repeatedly and over-reporting; For the contractor, each workload can be carefully calculated according to the actual situation on site, and his own calculation formula can be clearly marked on the contractor's calculation book for the convenience of the contractor. For the part that needs to be deducted due to the large deviation of workload, the construction party can be given a reasonable explanation, and the construction party can agree to deduct part of the workload. For the workload that is wrongly changed due to its own calculation error, it can be humbly accepted and corrected in time after being pointed out by the construction party. Due to the omitted workload calculated by the construction party, it can also be supplemented in time. Can be fair and just, in line with the serious and responsible attitude to the general contractor in the work, carefully review the workload reported by the construction party, resolutely refuse to give what should not be given, and ensure the interests of the general contractor; Treat the construction party with what should be done and what must be done. If the calculation of the construction party is omitted, the workload really completed on site can be pointed out and supplemented, so as to be responsible for the construction unit.

I am aggressive in my life and improve my work level. Constantly strengthen study and exercise, and strive to improve their ability to deal with practical problems; Pay attention to methods, pay attention to reality, and strengthen their work ability and self-cultivation; Pioneering and innovating, making positive progress, and raising the work to a new level. Strengthen self-transformation and self-improvement, and strive to improve the overall quality. Give full play to subjective initiative, improve the understanding of the importance and urgency of learning business knowledge, study business consciously and diligently, and lay a solid foundation. Love their jobs, be open-minded and eager to learn. When encountering problems, look more, ask more, think more, and ask more comrades around them.

Through the construction site management, I have increased my knowledge, broadened my horizons, summed up a lot of on-site construction experience, and learned advanced management experience and construction technology. The theoretical knowledge in the book and the practical experience on the spot have reached a perfect combination. At the same time, with the continuous improvement of the level of social building construction, I am required to keep up with the situation in my future work, work more carefully, learn new technologies, meet new challenges, strive to practice Scientific Outlook on Development, correct shortcomings, give full play to my advantages, and make my own contribution to the construction and development of the company. At the same time, it also firmly establishes the new architectural concept of quality first and owner (user) supreme. I will devote myself to project management with great enthusiasm, pragmatic attitude and rigorous work style.

Summary of monthly work of construction engineering 2. Through this month's internship, I have gained a lot in practical knowledge. The explanations learned from textbooks before have also been confirmed in practice, and a lot of specific construction knowledge has been learned, which is more flexible and more operable than theory.

This summer internship brought me not only a social experience, but also a fortune in life. What's more, I made some good friends during my internship, and they gave me a lot of help. As the saying goes, what you get on paper is always shallow. It is not profound to study without applying theory to practice. Nowadays, college education is mainly based on theory, and it is a great benefit for me to have the opportunity to practice in a design company. I am about to graduate and go to the society. I believe this internship will help me to take part in the work in the future.

Through this internship, I feel that I have gained something online. Internship is mainly to promote the improvement of our future work and business ability, enhance our future competitiveness and add a cornerstone for our future foothold. The foundry of the internship unit also gave me many opportunities to participate in their release. What I have learned are many problems that were difficult to solve before and problems that I will face in the future. This internship has enriched my knowledge in this field, made me step forward to a deeper level, and promoted my foothold in the future society to a certain extent. However, I also realize that it is not enough to rely on internship these days, but also to accumulate bit by bit in my usual study and work and constantly enrich my experience. The road ahead of me is still very long, and I need constant efforts and struggles to really walk well. I firmly believe that through this period of internship, the practical experience gained will benefit me for life, and will be constantly verified in the actual work after graduation. I will continue to understand and appreciate what I have learned in my internship, and apply my theoretical knowledge and practical experience to my future practical work to fully demonstrate my personal value and life value.

If the value is large, there is a risk of cracks. However, if the surface is covered with light thermal insulation materials, such as foam sponge, in time after formwork removal, it will play an obvious role in preventing excessive tensile stress on the concrete surface. Steel bars have little effect on the temperature stress of mass concrete, because the reinforcement ratio of mass concrete is extremely low. It only affects ordinary reinforced concrete. When the temperature is not too high and the stress is lower than the yield limit, the properties of steel are stable and are not affected by stress state, time and temperature. The difference between the expansion coefficients of steel bars and concrete is very small, and when the temperature changes, only a small internal stress is generated between them. Because the elastic modulus of steel bar is 7~ 15 times that of concrete, when the stress of internal concrete reaches the tensile strength and cracks appear, the stress of steel bar will not exceed 100~200kg/cm2. Therefore, it is difficult to use steel bars to prevent small cracks in concrete. However, after reinforcement, the number of cracks in the structure generally increases, the spacing becomes smaller, and the width and depth become smaller. Moreover, if the steel bars are thin in diameter and closely spaced, the effect of improving the crack resistance of concrete is better. Thin and shallow cracks often appear on the surface of concrete and reinforced concrete structures, most of which are shrinkage cracks. Although this kind of crack is generally shallow, it still has some influence on the strength and durability of the structure. In order to ensure the quality of concrete engineering, prevent cracking and improve the durability of concrete, the correct use of additives is also one of the measures to reduce cracking. For example, using water reducing agent and anti-cracking agent, I summarize its main functions in practice as follows:

(1) There are a lot of capillary pipes in concrete. After water evaporates, capillary tension is generated in the capillary, which makes the concrete shrink and deform. Increasing the pore size of capillary can reduce the surface tension of capillary, but it will reduce the strength of concrete. This theory of surface tension was recognized internationally as early as 1960s.

(2) The water-cement ratio is an important factor affecting the shrinkage of concrete, and the water consumption of concrete can be reduced by 25% by using water reducing and crack preventing agent.

(3) Cement dosage is also an important factor of concrete shrinkage. Under the condition of maintaining the strength of concrete, the dosage of cement can be reduced by 65,438+05%, and its volume can be supplemented by increasing the dosage of aggregate.

(4) Water reducing and anti-cracking agent can improve the consistency of cement slurry, reduce concrete bleeding and reduce shrinkage and deformation.

(5) Improve the cohesive force between cement slurry and aggregate, and improve the crack resistance of concrete.

(6) Concrete is restrained to produce tensile stress when it shrinks, and cracks will occur when the tensile stress is greater than the tensile strength of concrete. The water reducing and anti-cracking agent can effectively improve the tensile strength of concrete and greatly improve the anti-cracking performance of concrete.

(7) Adding admixture can make concrete compact, effectively improve the carbonation resistance of concrete and reduce carbonation shrinkage.

(8) The retarding time of concrete mixed with water reducing and anti-cracking agent is appropriate, which can effectively prevent the rapid hydration and heat release of cement and avoid the increase of plastic shrinkage caused by long-term non-coagulation of cement.

(9) The concrete mixed with admixture has good workability, and the surface is easy to level off, forming a micro-membrane, reducing water evaporation and drying shrinkage. Many additives have the functions of retarding setting, increasing workability and improving plasticity. In engineering practice, we should do more experimental comparison and research in this field, which may be simpler and more economical than simply improving external conditions.

(10) The early curing practice of concrete proves that the common cracks in concrete are mostly surface cracks with different depths, which are mainly caused by the sudden drop of temperature in cold areas caused by temperature gradient. Therefore, the thermal insulation of concrete is particularly important to prevent early cracks on the surface. From the point of view of temperature stress, thermal insulation shall meet the following requirements:

1) to prevent concrete temperature difference between inside and outside and concrete surface gradient, to prevent surface cracks.

2) In order to prevent concrete from freezing, the lowest temperature of concrete during construction should be no lower than the stable temperature of concrete during use.

3) Prevent the old concrete from supercooling, so as to reduce the constraint between new and old concrete. The main purpose of early curing of concrete is to maintain suitable temperature and humidity conditions, so as to achieve two effects. On the one hand, it can protect concrete from adverse temperature and humidity deformation and prevent harmful cold shrinkage and dry shrinkage. On the one hand, the hydration of cement goes smoothly to achieve the designed strength and crack resistance. Appropriate temperature and humidity conditions are interrelated. Thermal insulation measures often have a moisturizing effect on blood coagulation. Theoretically, the water content of fresh concrete can completely meet the requirements of cement hydration. However, due to evaporation and other reasons, it often causes water loss, thus delaying or preventing the hydration of cement, and the surface concrete is most easily and directly affected by this adverse effect. Therefore, the first few days after concrete pouring is the key period of maintenance, and more attention should be paid in construction.

Therefore, in the process of construction, we should handle these incidents carefully and deal with them according to different situations. Attention should be paid to these problems in construction, such as what kind of cement and its dosage, and early maintenance of concrete.

Template design:

(1) Construction preparation: 1) Setting-out: First, measure the axes of the side columns and walls of the building, and lead out the axes from this axis. During template setting-out, the center line and edge line of the template shall be popped up with chalk line according to the construction drawing, and the edge line and outer control line of the template shall be popped up for the wall template, so as to facilitate the installation and correction of the template.

2) According to the requirements of actual elevation, directly measure the horizontal elevation of the building to the installation position of the formwork with a level.

3) The bottom of the formwork shall be leveled in advance, and sundries shall be cleaned to ensure the correct position of the formwork, so as to prevent slurry leakage or root rot at the bottom of the formwork after concrete molding.

4) The foreman determines the assembly design scheme of the template in advance, and makes technical, quality and safety disclosure to the construction team.

5) Template shall be coated with release agent.

I firmly believe that through this period of internship, the practical experience gained will benefit me for life, and will be constantly verified in the actual work after graduation. I will continue to understand and appreciate what I have learned in my internship, and I will continue to apply my theoretical knowledge and practical experience to my practical work in the future to realize my ideal and bright future.

On the first day, as the second batch of students, I entered the training base. What we are going to do today is the simple operation of formwork engineering. Our task is to splice beam formwork with shaped composite steel formwork. Now, it has become a trend in the construction industry to replace wooden formwork with shaped composite steel formwork. Compared with wooden formwork, this formwork has the advantages of high installation efficiency, flexible assembly, strong universality, convenient disassembly and assembly and more turnover times. Each set of steel formwork can be reused for more than 50~ 100 times. The processing precision is high, the quality of the poured concrete is high, the size of the molded concrete is accurate, and the surface is smooth, which can save the decoration cost. We took two steel molds, 30 cm wide and 120 cm long.

Put it on the ground and fix it inside with a U-shaped card. We have connected the two steel molds, and then we will connect the two plates vertically with angle steel. It is convenient to use the U-shaped card horizontally, but it is troublesome to use angle steel vertically. However, with great perseverance and wisdom, we finally succeeded in completing the task. In just one hour, the knowledge about formwork engineering that we have learned before has been deeply understood in practice. At the same time, I also understand the hard work of construction workers.

Arrive at the training base on time the next day. Today's content is the key point of building engineering-reinforcement engineering. Each of us has to make and weld a stirrup. Moreover, it is difficult to make stirrups that meet the specification requirements. The stirrup is a simple rectangle with two hooks of 135. The length of these two hooks and their extensions are the most difficult to manufacture and control. But nothing is difficult in the world, if you put your mind to it. Through our precise calculation and careful operation, with indomitable courage and perseverance, a nearly perfect stirrup was born in our hands. Holding the crystallization of blood and sweat, we realized the happiness of labor. After the stirrup is made, we have to weld two hooks of the stirrup. At present, the welding in the construction site mainly includes electroslag pressure welding, flash butt welding, arc welding and gas pressure welding. We use arc welding. Welding is a technical activity that needs originality. Not to the point, not to the point anyway. It's easy to grasp the key points. After an hour of hard work and struggle, we successfully completed the training content.

The last day of training is scaffolding engineering. Scaffolding is the structure around the building, which plays a protective role in the construction process. What we need to do today is to understand the structure of scaffolding and the simple construction methods in actual operation. The teacher has set up the basic part of the scaffold on the ground, and all we have to do is finish the above part. Our task is to build a shelf six meters long, three meters wide and about one floor high. Every 1.8m, a steel pipe with a length of 3m shall be erected. Then fix the steel pipe with a clip at a distance of 0.3 meters from the ground. Together, Qi Xin quickly completed the laying of the first layer of steel pipes. Erect the second layer of steel pipe at a distance of 1.8m from the ground. It will be finished soon. After that, a six-meter-long inclined steel pipe, also known as scissors, was erected. Then stand on the second layer of steel pipe and put it on. This is another story. If the work goes too smoothly, there is something wrong. Because of blindly catching up with the progress of the project and substandard operation, the scaffolding we built became a staggered work of art. With the persistence and seriousness of the engineers, we completed the task perfectly from the beginning. After understanding, we organized a three-day architectural training to deepen our understanding.

The three-day training will soon be over. During this period, I have a deeper understanding of theoretical knowledge and accumulated some practical experience. I am proud of being an engineer.

Monthly Work Summary of Construction Project 3 Time flies quickly. In a blink of an eye, I have been busy with the Jinghua apartment project for more than a month. Looking back on this more than a month, I am nervous and full. In the future work, I will sum up experience, learn lessons, work harder, and devote myself to my work with more full spirit and down-to-earth work style. ...

I am responsible for the site construction, technology and drawings of the project. Check the axis and elevation control of all building numbers, and urge all building numbers to repair quality defects.

Strengthen coordination and cooperation with various functional departments to create a good working atmosphere. The operation of construction projects involves all aspects, and coordination must be done well. In the process of construction, it is necessary to unify the pace, form a joint force, actively report the problems and situations encountered in the project implementation process to the leaders, communicate and coordinate, so as to ensure the smooth implementation of the project construction.

Under the leadership of the company and the project manager, I will make a serious summary and profound reflection in the main construction of each building to minimize the occurrence of work mistakes.

I work hard at every stage of my work and actively complete the tasks assigned by leaders at all levels. On the basis of doing a good job, I will continue to study and study, and strive to improve my professional level.

Construction projects are also special in timeliness, and various specifications are constantly updated and developed. I not only need to learn by myself, but also should take the initiative to communicate with each other, learn from each other, learn from each other's strengths and constantly improve my business knowledge and technology. Summary of construction workers' work In the future, we should earnestly improve our comprehensive quality, establish a conscious awareness of learning, review old knowledge step by step, persevere and study in a down-to-earth manner, so as to learn real talents and practical knowledge and integrate what we have learned into specific work.

As the project manager, the total number of single buildings is 1#, 2#, 3# and 4# long. I pay attention to control the construction quality of the project, coordinate the relationship with the construction unit and supervision unit, coordinate the management of the team, actively cooperate with the security department to complete various safety management work, pay close attention to material management and save the project cost.

First of all, it is mainly the following aspects:

1, project quality management.

In view of the particularity of Wang Hucheng project, the project quality requires high standards and a high starting point. In the early stage of construction, pay attention to the technical disclosure of the team, pay attention to the team members ideologically, and understand the quality, progress and safety requirements of the project technically, so as to lay a good foundation for the later construction.

4# is the first monomer to be constructed. At the same time, the structure is the same as that of Building 2. Strictly require carpenters, steel workers and bricklayers to construct according to drawings and video materials (photos, etc.). ) is reserved. Ask the team leaders of other monomers to come up to watch and put forward their own opinions, and other monomers will be constructed according to the requirements of 4#. This measure has achieved good results and laid a foundation for future construction quality. In the later period of quality management, each monomer reached the acceptance of the supervision unit and all passed, which won the praise of the construction unit and supervision unit.

2. Management of four single buildings, 1#, 2#, 3# and 4#.

3. Team management and coordination.

(1) The construction manager is the most basic unit in the institute. Managers are both commanders and fighters, the embodiment of leaders' will and opinions, and the feedback of grassroots issues. Therefore, it is more necessary to establish a good self-image, become an example for colleagues in work, and become a trustworthy partner for colleagues emotionally. We are required to work overtime and be the first to arrive, and we are required to set high-quality standards. Therefore, I have participated in all hidden projects, paid attention to process control, and controlled some common quality defects in the bud.

(2) Caring for colleagues: When colleagues have something to do, they take the initiative to help cover for them, and organize the whole class to care for their condolences together to form a big family atmosphere.

(3) Pay attention to the training of four single building numbers. At every meeting, aiming at the problems existing in construction cooperation, I try to let every comrade take the leadership position at least once to increase experience, so that every comrade can be independent and deal with various problems, and the business and technical level of the whole team has been improved as a whole.

4, safety management work

In the process of work, we actively cooperated with the security department to do a good job in the safety management and education of construction personnel, and achieved excellent results in many inspections by the construction unit. In the fourth quarter safety inspection, 1# was identified as the safety management demonstration monomer of this project.

5. Coordination with the construction unit and supervision unit

As a construction manager, I paid attention to the coordination with the construction unit and supervision unit from the beginning of the Wang Hucheng project, and took the lead in studying and implementing the good suggestions put forward by the construction unit and supervision unit, which won unanimous praise from the construction unit and supervision unit.

6, material management work

Based on the principle of cost saving, we strictly control the control of raw materials in the actual work process, and every penny is spent on the project in the use of formwork, concrete and steel bars. For example, after the construction of each floor is completed, it is important to ask the reinforcement team to sort out and collect them, all of which are used for the lower construction. The concept of cost saving has been implemented in the actions of each team to save costs in project construction.

7. Technical management

In the work, the requirements for construction technology are more stringent. During the working year, 37 work contact sheets were put forward, which played a certain role in the project schedule. For example, in the civil air defense construction from June 5438 to February this year, I took the initiative to negotiate with the leaders of the project department and put forward the construction technology of changing the post-pouring belt into the strengthening belt. After receiving the affirmation and support from the leaders, I negotiated with the construction unit, supervision unit and design institute for many times, and finally achieved the expected goal, and regained a certain time limit for the civil air defense project construction.

Second, new works

In my work, when I meet some new jobs, I always actively cooperate with the company and the project department and actively participate in the performance of 20xx on May 20th. This exercise has won a good reputation and far-reaching influence for the project department.

Third, the attendance rate

This year, I insisted on leaving Man Qin without being late, leaving early and being absent from work. All activities organized by the unit can be present on time and actively participate.

Fourth, the ideological situation.

In order to improve my ideological understanding and political consciousness, I actively moved closer to the party organization and earnestly studied the spirit of the party and the company's policies. Pay attention to learning new technologies and apply them to practical work.

Problems in verb (abbreviation of verb) and its improvement plan

While getting good grades, I also have some problems in my work. For example, some common quality problems still exist. In order to improve work efficiency and quality, I will focus on the following aspects in the next stage of construction:

1, strengthen various political studies and improve personal literacy.

2, strengthen business learning, improve business quality, improve the quality of work.

3. Work creatively and think more about ways to improve working methods. Improve work efficiency, make preparations before each work, and don't fight unprepared battles.

4. Strengthen communication with the leaders of the institute, so as to deepen the supervision work.

The above is a summary of my personal work. I hope all leading colleagues can give me suggestions. Finally, thank you again.

Summary of monthly work of construction engineering 4. From an ignorant student who has just left school to a group of new Xingtai people, we have experienced a lot, paid a lot, learned a lot and matured a lot.

From the beginning of March when we first came here to the end of1February, from the basement construction of Guotai Business Plaza to the numerous towers now, although it is only a few months, we have gained a lot during this time. I have met many friends, many "teachers", and most importantly, I have learned a lot of knowledge. From theory to practice, from being a man to doing things, I have gained a lot and felt deeply.

I remember when I first came here in March, I was still an intern. There were many people at that time, and there were nearly 20 interns. I remember telling myself, "Don't think too much, stick to it, stick to it!" Study, study! "Maybe I know too little. I feel that I have gained a lot every day. I feel very fulfilled and practical. During this period, I have been following the quality inspection, doing construction and doing experiments, from "atlas, drawings, steel bars, templates and concrete" to "communication, coordination, management and block testing". Although I have done a lot, I don't feel like "browsing" or "the blind touch the elephant".

By the beginning of July, due to various reasons, many people who came in in the same batch left here one after another, and they also changed from internship to application. From the uncertainty of their previous positions to the formal assignment as a builder, from the hardening of the site to the cleaning of the basement to the training of waterproofing, backfilling and post-pouring belt, I have a further understanding and understanding of the position of builder and have come into contact with more workers. I also summed up some experience in getting along with front-line workers, that is, everyone is equal, don't pretend to be a small leader, don't disrespect workers, and learn to be "fickle" in management, and manage according to individual needs.

When T5 Tower started construction, I was lucky enough to become a full-time builder, with a heavy burden and many things to consider. Because the experience is still immature and the construction consciousness is not in place, I still got a lot of help from Manager Chen. If I don't know anything, I will write it down in my notebook, ask the person I will meet, and then dump him. During this period, the following problems existed on site:

First, there were some technical problems with tower cranes in the early stage of the construction site. Some tower cranes read novels and listened to music irresponsibly while working, which led to the slow hoisting speed. After many times of issuing rectification notices and communicating with Zhao Ziwei, it has been improved. I think this situation will be eliminated in the next year. As soon as the project starts next year, a special meeting on tower crane management will be held for the tower crane company and the person in charge, and all the problems and possible situations at this stage will be explained clearly. The tower crane company that arrives late and leaves early will be punished.

Second, because the prophase labor service did not carry out the construction according to the construction plan and flow section we formulated and divided, the prophase construction period did not meet the expected requirements. On the one hand, the laborers misunderstood the division of the construction section and did not understand the convenience. On the other hand, the communication between labor managers and workers is not enough, and the leadership of workers is not enough. I think it is necessary to communicate with the labor service in advance when the skirt building is constructed in a large area next year, and there should be a written document form. Besides the signature of the labor management personnel, the name of the person in charge of the construction team should also be signed, which is more binding on them.

Third, it is the problem of dragging the pump on site. Our concrete pump contract this year was a mistake. T5, the concrete is poured once every ten days on average, and our pump will cost tens of thousands of dollars a month to rent here. I think only one electric pump will be rented next year (the pressure of the electric pump is enough to meet the construction requirements), and the rest will be rented in T 1, T2 and T2. Manager Gao has a saying that I quite agree with him: everything must have a certain number of "ha", so in the later construction process, I focused on how to make rational use of limited resources, how to rationally divide the working face, how to improve the work efficiency of workers, and how to speed up the construction progress, shorten the construction period and complete the task with good quality and quantity while ensuring safety.

;