How many specifications does the pigsty have? How to make it?

There are three specifications for special wild boar cages. The first is the cage for adult wild boar. Specification: length 1.4m, height 0.65m, width 0.5m. The mesh of the cage is rectangular, length 0.2m, width 0.07m.: The size of the net at the bottom of the cage is 0.2 meters long and 0.03 meters wide, and the direction of the net is consistent with the cage. Welding with 0.65 mm steel bar. The height and width of both sides, one side is welded, and the other side is a cover, which can be moved to seal the cage after the pig is loaded.

The second is the cage for China pigs. Specifications are: length 1.2m, height 0.6m, width 0.4m. The mesh of the cage is rectangular, and the size is 0. 18m long and 0.05m wide. The mesh size of cage bottom is 0. 12 in length and 0.02 m in width. The meshing direction of the cage is the same as that of the cage. Welding with 0.5 mm steel bar. At both ends of the cage, one side is welded and the other side is covered.

The third is the cage of the young wild boar. Specification: length 1 m, width 1 m and height 0.45 m; The mesh size of the cage is 0. 15m long and 0.4m wide. The mesh size of the cage on the ground is 0. 12m long and 0.0 15m wide. Welded with 0.4 mm steel bar. The upper cover 1/2 is welded, and the other 1/2 is movable, which is used to put pigs in the cage.