How to deal with the kick of cylinder

Cut the cylindrical skirting line into small pieces of 3-5 cm, splice them together, directly apply the caulking agent, cut off all the ribs behind the plastic skirting line, and then soften and bond them with electric wind. Lift the circular cement completely along the corner with an impact drill, level the ground with gypsum, and plaster the wall to restore to our common 90-degree vertical angle. After the floor is laid according to the normal process, the skirting line can be installed.

Go to the building materials market to buy a plastic sheet. The thickness of the plate depends on the height of the cement camber, which is higher than that of the cement camber. When you come back, spread the plastic sheet on the ground, press down the cement cambered surface, hollow out a part under the plastic sheet, and level the place near the corner. After completion, lay the floor on the poly plastic board, and install the baseboard after installing the floor.

Dark color paste, no dust, beautiful. ?

When my home was decorated, a friend of Sina's decoration foreman told me that he was right, not dusty and beautiful.

Each has its own advantages. It's not easy to hide ash in hidden stickers, hidden stickers and hidden stickers. Obviously, it's better to stick the skirting line, because this is a big gap in itself, and we must consider the reasons of thermal expansion and cold contraction.

Of course, the baseboard is made of solid wood, but it is more important to see which way the landlord likes. One is the approach method and the other is the contrast method. These two methods are completely different. The approach method generally chooses the color close to our floor, so there is another meaning of the contrast method.

Contrast generally means that the color is different from the floor, but it should be noted that not all floors are suitable for comparison. It is not recommended to use the approach method to select the light skirting line for light-colored plastic floors.