What if the emerald on the ring falls off?

You can wrap the cracks in Yuhuan with gold or other precious metals. If it doesn't look good, you can also use gold to make some shapes you like to cover the cracks and make Yuhuan reborn.

Finally, you can also use the gap filling method to fill the damaged part with synthetic resin mixed with talcum powder, and the color is the same as that of the jade ring.

Find a technician to brush gold to repair the jade bracelet. The way of tracing gold is to cover a layer of gold or silver on the crack and wrap it in the crack according to the way of tracing gold. It can also strengthen the structure of the bracelet, and it is repaired by secondary production and processing according to the cracks and the original style of the bracelet.

For cracked jadeite bracelets, gold tracing can be used. In this way, the cracks are covered by golden tracing lines, and at the same time, they also play a decorative and reinforcing role. For jade bracelets that have been broken into two pieces, the method of jade inlay is generally adopted.

You can use gold to repair it, or you can use gold to make some shapes you like to cover the cracks and make Yuhuan reborn.

What if the jade suddenly breaks? What should I do if the jade falls?

Only a small part is broken, and it is still intact on the whole: it can be redesigned+carved.

Fracture bonding repair, with high-efficiency adhesive evenly coated on the fracture surface for bonding.

It can be used to cover up the broken jadeite defects when the jadeite is repaired by gold tracing. Generally speaking, the repair of jadeite bracelet with gold tracing is to make a slight gold tracing at the crack to cover the crack, and at the same time, the light gold tracing also plays a decorative role in the bracelet.

What if the emerald on the silver ring falls off?

1. The jade on Yuhuan has fallen off and can only be backfilled and repaired. If there is a broken place, first clean up the jade wound, then adjust the resin or chemical pigment, the color is the same as that of Yuhuan, then do bonding, and finally polish it. Jade ring is tough, but it doesn't mean it's not afraid of being beaten.

2, hello, this situation needs to be glued with professional gems. I suggest you take it to the store where you bought it, and they will have a master to maintain it. I hope it helps you. Thank you.

3. The solution to the jewelry on the ring: you can only go to the local jewelry store to find someone to repair it. I'm not a professional and I can't solve it.

4. If it is dropped, it will be returned to the merchant for handling, which belongs to after-sales service.

You can go to the nearby jewelry store. There should be a foundry at the door to set stones, if a piece of silver falls. They can also add a piece of silver themselves, heat it at high temperature and inlay it. I think you can try, because I have already tried.

6. Clean up the silver part and see if the torus can be pressed back. The inlay part should not be too tight, as long as it can't be pressed in. The tightness should be appropriate. Take off the ring face, clean the part to be combined, and there should be no foreign objects, silver embroidery or oil on the silver ornaments.