Fortune Telling Collection - Ziwei fortune-telling - What is the name of brain control? Is it true?/You don't say. Many people on the Internet say that the experience is real.

What is the name of brain control? Is it true?/You don't say. Many people on the Internet say that the experience is real.

Brain-controlled cracking technology

One is the electromagnetic wave acting on human body (especially the technology of reading electromagnetic wave from human brain).

Second, change the effect of electromagnetic waves on people,

Third, shielding electromagnetic waves acting on people,

Fourthly, the technical formula for dealing with brain-computer interface,

First, the role of electromagnetic waves on the human body

Electromagnetic wave acts on human body, which actually puts human body in electromagnetic field and has different effects on human body at different electromagnetic wave frequencies.

We know that there will be a magnetic field around the magnet, from N pole (commonly known as North Pole) to S pole (commonly known as South Pole). The magnetic field intensity is different at every position around the whole magnet. Each magnetic field position has an entrance and an exit, and there is a magnetic field force difference between the entrance and the exit.

All electromagnetic waves acting on the human body have the following characteristics:

1. Electromagnetic waves have positive and negative poles, and there is a pressure difference acting on the human body. People can feel this pressure difference.

2. High-intensity electromagnetic radiation can cause physical pain, tissue lesions, blood vessel burst, etc., but it can be avoided and shielded.

Bioelectromagnetism (a textbook published by National University of Defense Technology) tells us that every cell of human body is a magnet containing minerals, electrolytes and water, with positive and negative poles and vibration frequency, and every organ of human body has a certain vibration frequency. In order to have an effect in human body, electromagnetic waves must be consistent with the vibration frequency of human organs.

However, the vibration frequency of human organs will change with the change of muscle tightness and the position movement of human organs. For example, when people stand and lie down, the whole vibration frequency of all organs in the whole human body will change, so we can change the vibration frequency of human organs without any equipment. Not controlled by external electromagnetic waves.

3. When electromagnetic waves propagate, some objects will be weakened and some objects will be amplified. Therefore, we need to use suitable materials (materials that will weaken electromagnetic waves) to shield electromagnetic waves that are harmful to our health in a certain band. Generally, low-frequency waves are harmful to human body, generally at 0- 100hz (mainly at 0-45hz, the electromagnetic wave band of brain activity).

4. Brain-computer interface technology

Brain-computer interface technology refers to reading brain waves by reading brain electromagnetic wave equipment,

Then it is transmitted to the server (that is, computer, computer) through the transmission system.

There is a software system in the server (computer, computer) that can decode the read brain electromagnetic waves. Although there are billions of human beings, all people's brain waves can be divided into five categories (for example, people all over the world will only produce five different brain waves when they look at the same apple from the same angle in the same environment). Just as there are only a few blood types (A, B, O, AB), after reading the brain waves, we can find the brain wave types of everyone through the software system, and then decode the individual brain waves after determining the types.

When brain waves are read continuously, the brain is connected to the computer system. The brain can communicate with the computer. If one person is connected to a computer and the other end of the computer is connected to another person, then two people connected at both ends of the computer can exchange information such as sounds, images and thoughts.

Brain-computer interface system can communicate like a mobile phone call, that is, you can communicate with people at the other end of the computer through the computer. This is a full-duplex communication system.

Brain-computer interface technology is divided into idea output and idea input.

All sounds, images and thoughts, as long as the brain is thinking, the other party will hear, see and feel. You don't have to open your mouth or play videos.

The output of ideas can be controlled by each other.

The input of ideas is controlled. So the input of ideas is harmful.

Because the brain electromagnetic wave is very weak, it cannot be received beyond 1.5 meters, so in order to get close to the receiving target, the brain wave receiving device is hidden. Generally, the visible light invisible material is wrapped on the outer layer of the brain wave receiving device, so that the brain wave receiving device cannot be found when it moves within the range of human body 1.5 meters.

Visible invisible material is a kind of material that can't be seen under sunlight and light, and it can also hide a person from being found. It is widely used in brain-computer interface devices to receive human brain waves in a hidden and secret way without being discovered.

The technology of brain wave reading includes: reading with external device, diving into the chip inside the brain (craniotomy, implanting the chip into the brain), semi-diving into the chip (placing the chip in the cerebral cortex without craniotomy) and so on.

At present, in vitro brain wave reading equipment is widely used. Because of the power supply, the difficulty of implantation (craniotomy is needed), the oxidation life of blood and body fluids after implantation, chip technology and the need for the complete consent of the implant, it is difficult to use the submersible chip. Semi-submersible also has similar problems to submersible. At present, in vitro brain-computer interface technology has been widely used.

Second, change the effect of electromagnetic waves on people.

Electromagnetic waves act on human body with pressure difference and positive and negative poles. Under the action of electromagnetic waves, different parts of the body will feel different pressures.

Perception of electromagnetic waves, pre-practice.

Close your eyes, relax and lie flat.

Face up (don't lie on your side or face down, with your back facing up, which will expose the spine, which is one of the most concentrated places of the human nervous system, and it is easy to read the bioelectric activity of the human body).

Keep your hands close to your body and naturally droop along your chest, abdomen and buttocks. Meditation, give a force from the head, scan the body down, scan the whole body from head to toe, and scan it repeatedly.

If there are electromagnetic waves acting on the body, you will feel that the force exerted on the individual position is different. There is no special feeling in most parts of the body, and some parts feel different. These positions are the positions where electromagnetic waves act on the body. Changing it can change the effect of electromagnetic waves on human body.

Mid-term exercise

Electromagnetic waves can directly act on the human body through direct radiation; It can also be dispersed in the air at a certain distance from the body to act on the human body; You can also guide electromagnetic waves to objects and then reflect them to people's bodies. Therefore, in addition to learning to scan the body with the brain, we should also scan the air space around people and the electromagnetic waves of all surrounding objects (including the ground, ceiling, various furniture, etc.). ).

Send out a force from the body and scan the force of all the objects around at the same time. If there are electromagnetic waves, you will feel that the force of that object is different from that around it, except for a few points in the whole space, most of them are the same.

In general, several different electromagnetic waves will act on the human body at the same time, so several points will be perceived.

Finally, change the effect of electromagnetic waves on the body.

After sensing the electromagnetic wave, if it acts directly on your body, you can change your body posture. For example, it may act on your head, let your head stand against the wall, act on your heart, block your heart with your hand, let your hand weaken the electromagnetic wave first, and act on your soles, so that your feet can cling to walls, floors, bed edges and so on. Electromagnetic waves can act on all parts of the body and work on the body. The joints on the left and right sides of the heart, ears and periphery, face, forehead, chin, top of the head, back of the head, spine, hands, feet and buttocks, and basically more meridians are often affected.

Electromagnetic waves scatter in the air and act on the human body.

In this case, you can directly perceive the shape of electromagnetic waves in the air. You can meditate to change the shape of electromagnetic waves and insert different objects such as steel needles and wooden sticks. (You can use all the objects you can think of, there is no limit) On the edge of electromagnetic waves, move the position of electromagnetic waves, turn the other side into air electromagnetic waves, and so on, as long as you can change the useful methods of electromagnetic waves, all methods are unlimited.

Electromagnetic waves are aimed at objects and then reflected on the human body.

In this case, it is necessary to find out through which object the direct light is reflected on the human body.

Find it, cover it with something or wrap it up. Sealing the metal box and covering it with water will greatly reduce its function. Or put it in other imaginable confined spaces, it can also reduce its function.

When you change the frequency of electromagnetic waves around your body, the other person will change the frequency in order to continue to control, so your frequency will be the same, and you will continue to control. In order to stop being controlled, you will change the frequency of electromagnetic waves around your body. So changing the frequency of electromagnetic waves is a constant change. When you are controlled, you must change it.

Third, shielding electromagnetic waves acting on people,

Low-frequency wave (0- 100hz) generally interacts with the brain, and the input of low-frequency wave into human body will cause acousto-optic phenomena such as hearing and vision.

High-frequency waves can cause pain, tissue lesions and so on.

Electromagnetic shielding can be divided into absorption and reflection.

The following shielding materials are useful through experiments.

Wave-absorbing cotton, pearl cotton, cowhide, double-sided adhesive tape and facial tissue are mainly used to absorb electromagnetic waves when delivered to Danhong.

Silver fiber cloth, conductive copper tape (wider width, convenient use, no need to stick it so many times. Don't tear the paper on the back, which also has a shielding effect), aluminum tape (also try to use a width of more than 5 cm), conductive carbon paper (because it is easy to break, both sides should be glued with ordinary tape first), permalloy 1j85, these are mainly metal materials that reflect electromagnetic waves.

There is also a lead coat commonly used in dentistry, which can also reflect electromagnetic waves. This kind of clothing is generally in the shape of clothes that can be worn directly.

The electromagnetic wave band acting on human body is widely distributed. Therefore, it is impossible to completely shield all electromagnetic waves acting on the human body with a single material.

Therefore, all the above materials should be used together to shield most of them. Because electromagnetic waves spread like water and air, they can pass through with tiny gaps. So all kinds of materials should stick together.

Because the dental lead coat is in the shape of clothes, these materials can be directly attached to the dental lead coat, which is convenient for later wearing. There is also a dental shield cap, and these materials can be attached to the dental shield cap. Because everyone's head shape is different, we should pay attention to our head shape, and ensure that the prepared shielding cap is tightly attached to the head, and there is a gap between the hat and the head, so that electromagnetic waves will spread and the shielding effect will not be achieved.

So pay attention to the size of the body, the closer to the body, the better. If there is a gap, the shielding effect is not ideal.

Because after the shielding is done, it is more complicated to wear. In general, you don't need to wear a shield. As long as we constantly perceive the effect of electromagnetic waves on the body and change the effect of electromagnetic wave frequency on the body, we can generally solve the problem.

You can also use headphones with good sealing to cut the thread ends, wrap them all in cotton, and then wrap them all in a layer of tissue paper. Be careful not to be too big, each layer is wrapped and stuffed in the ear, which also has obvious shielding effect.

If you encounter electromagnetic waves that make people feel pain or organ diseases, you can look at them with the shielding material above. Because in addition to shielding, it is impossible to solve this problem simply by changing the electromagnetic waves around you with your own body.

For example, abdominal pain, diarrhea and vomiting are mostly caused by electromagnetic radiation. A cotton coat filled with cotton and synthetic fibers, with long sleeves and zippers, can be pulled directly to the chin. The skirt should be long enough to cover the buttocks, and it is particularly important to be very tight, because it is too big to have a gap to achieve the shielding effect. Such a dress can shield stomach pain, diarrhea, vomiting and other problems caused by electromagnetic waves. Pay attention to the gap at the lower end when wearing it, and it is best to tie it with a belt.

Fourthly, the technical formula for dealing with brain-computer interface,

1. Rule base with library. 2. Treat sound with sound. In order to manage the map, he sends you images, and you can send them to him. Change will never change, because when you change the body frequency, they will immediately adjust their own frequency, so when they can control you, you should also change your own frequency. So keep changing. 5. change it quickly. 6. Sometimes, we have to use sound to process images, or use images to process sounds.

The times are developing, and even the most advanced technology has its loopholes. Being cracked is a historical necessity. There should be people of different levels to crack this technology, even if I don't.