Fortune Telling Collection - Ziwei fortune-telling - How to maintain the rubber of table tennis

How to maintain the rubber of table tennis

Maintenance methods of table tennis rubber;

1. Wipe the rubber with sponge and cleaning solution after playing. The main purpose is to remove dust and water vapor from rubber and avoid the necessary conditions for oxidation.

2. After cleaning, paste the protective film. When playing ball, be sure to put the astringent protective film in a safe place. If it is stained with dust, the astringent protective film will lose its function.

3, placed in a cool and ventilated place, the cool place is mainly to avoid sunlight, and the ventilated place is mainly to avoid the bottom plate from being damp.

Extended data:

Pay attention to your health

The maintenance of table tennis bat can be simply summarized as three sentences: the bottom plate is moisture-proof, the rubber is anti-aging and the use is anti-falling. The specific method is: after the racket is used, wipe the stains on the rubber surface with a special sponge, and stick a special ping-pong anti-sticking protective film after the water dries. The positive electrode glue should be collected after the leather surface is dried. When collecting rackets, put them in a ventilated and dry place, away from heat sources, and avoid exposure to sunlight. Do not pile up heavy objects on the rackets.

1, avoid heating. Sponges and rubber of table tennis bats are easy to age after being heated, and their viscosity and elasticity are reduced, commonly known as "death". The board is also easy to deform after being heated, which affects the accuracy of hitting the ball. At the same time, avoid contact between sponge and rubber sheet and gasoline. Once it comes into contact with gasoline, rubber products will deform and deteriorate. ?

Because sponge is an expanding body, it should not be excessively pulled and stressed during use. When playing in a low temperature place, you should pay attention to proper heat preservation, because the bottom temperature will affect the elasticity of the sponge. People who use a single piece of rubber sheet and sponge sheet should use a fire-roasting electric perm head to iron the rubber sheet when replacing the rubber sheet, so that the glue between the rubber sheet and sponge can be fully dissolved and the sponge can be prevented from being damaged when replacing the rubber sheet.

2. Prevent friction, impact and extrusion caused by abnormal external forces. If you hit the ball correctly, the racket won't hit the table. When the racket is not in use, it is best to put it in a special racket case, and at the same time put a flat plate made of wood or plastic in the racket case to minimize the influence of external force on the racket.

3. Keep the racket surface clean. Once there is dirt on the rubber surface, the viscosity will be greatly reduced. Positive plastic racket can be gently wiped with a clean cloth dipped in water. The anti-adhesive racket should be wiped clean with a professional sponge every time after playing the ball. Care must be taken to avoid leaving scratches on the rubber surface. After the racket is used up, wipe the stains on the rubber surface with a special sponge, dry it and stick a special ping-pong anti-adhesive protective film.

The front rubber is low in rubber content, high in tooth hardness, low in friction, small in area and easy to slide because the rubber is in contact with the ball. Based on this feature, special attention should be paid to keeping the rubber dry when using positive glue. If you play in a wet place, you can wipe the rubber with a desiccant to reduce the humidity on the rubber surface.

Baidu encyclopedia-table tennis racket