Where is his wooden door?

1. performance is one of the most widely known characteristics of Tata wood doors. Because the base material of TATA wooden door is secondary dried Chinese fir, the surface of Tata wooden door is solid wood veneer. Tata wood door has the technical characteristics of no deformation, no shrinkage, no warping, no fission, moisture-proof and anti-drying. 2. Tata brand was founded in 1999, and it is one of the earliest enterprises in China devoted to the research, development, production, sales and service of finished bedroom doors. Tata advocates the concept of "1 creates beauty, and 2 creates products". It is famous for its simple and fashionable wooden door products and advocates a beautiful and scientific living environment. 3. The door cover of the tower is made of Robyn E 1 high density board, the back is made of melamine moisture-proof layer, and the front is made of advanced PU paint. If water splashes on the surface of the wooden door, it can be wiped clean with a soft cloth without any problems. When installing, professional installers will make a layer of wax or a thin layer of glass glue on the bottom of the door, so that you can get double protection when using it. 4. Due to the reasonable structure of Tata products, there is a sense of superiority in installation speed that other wooden doors do not have. Take a duplex family as an example. Tata can install all the wood products in two days with three installers. 5. The wooden door core of Tata adopts the mechanical plate of bridge hole, which has sound insulation, heat preservation, impact resistance, good stability, high flatness and luxurious texture. Water-based environmental protection glue is used in the production process, the surface is imported pu paint, and Chinese fir and wood bark are used as the main raw materials, and it is sprayed in a dust-free painting room, which is benzene-free, radon-free and environment-friendly. Adhesion, sealing, flexibility, fullness, film transparency, wear resistance and yellowing resistance. The process is to add color decoration on both sides of three substrates and cure at the same time, and the surface effect is very good.