What is the reason why the shower nozzle rushes out of the bug when a woman takes a bath? How did the bug get into the shower?

Ms. Zhong from Shenzhen found some red bugs crawling on the bathroom floor. At first, she thought it was the residue of washing vegetables, but later she found out that it was sprayed by herself in the shower. This is really a little scary. Imagine the feeling of these bugs scratching on her skin, and suddenly she got goose bumps all over the floor. After many investigations, she found that the worms were caused by the aging of the water pipes at home. The iron water pipe that has been used for 20 years has rusted, producing a lot of impurities and parasites. So how can we maintain the water quality at ordinary times?

1, use the water pipe well

At present, the common household tap water pipes are PPR hot-melt pipes, aluminum-plastic composite pipes and steel-plastic composite pipes, and galvanized steel pipes are rarely used again.

PPR water pipes: If hot and cold water are mixed, hot water pipes should be used uniformly. After the PPR hot water pipe is thickened, it can ensure a kind of stability and is not easy to be damaged in the future cold and heat exchange. The biggest advantage of PPR pipe is that its pipes and fittings are hot-melted. After hot melting, the pipe and pipe fittings are connected into a whole. This kind of pipeline is directly buried in the ground or in the wall, and the risk in the later stage is almost small. Other pipes, such as aluminum-plastic pipes, are of good quality.

Aluminum-plastic pipe: If the aluminum-plastic pipe is really qualified, the quality should be good, but there may be some problems related to the material, domestic material and corresponding joints. For example, cracks appear when bending, or water leaks at the joints, which are also some reasons why aluminum-plastic pipes are eliminated.

Aluminum-plastic composite pipe: From the pipe itself, aluminum-plastic pipe is more reliable. PPR pipe has a unique melting advantage, which ensures the stability of the joint. And this new type of pipe-PPR aluminum-plastic composite pipe has the characteristics of both. The outer layer of the pipeline is made of (PPR) polypropylene material, which can be directly connected with the pipeline, and there is an aluminum layer in the middle, which has much stronger compression resistance. The inner layer is made of heat-resistant polyethylene, which is superior to PPR pipe, so the combination of these two materials is equivalent to combining the advantages of aluminum-plastic pipe and PPR pipe.

2, regular cleaning reservoir

Some biological impurities will be produced during the use of the reservoir: aquatic organisms (such as algae) and bacteria, microorganisms, natural organic substances (such as humic acid) and so on. It is reported that there are as many as 222 1 species of known organic substances in water, some of which are carcinogens. If the pool is not cleaned for a long time, it will seriously endanger people's health. Cleaning the pool can effectively kill bacteria and microorganisms, avoid water quality hardening, and reduce the occurrence of disease infection and stones.

Steps for cleaning the swimming pool

1. Close the main water inlet valve, close the communication valve between water tanks, open the drain valve, and drain the water in the pool and water tank. Keep the drain valve open, and blow the air at the mouth of the pool and water tank for more than 2 hours with a blower to facilitate air circulation, eliminate toxic gases in the pool and water tank, and blow in fresh air.

2. The person in charge of cleaning the pool should call the cleaning personnel and maintenance personnel to explain the cleaning procedures, safety measures, technical requirements and safety precautions, and supervise the staff to wear work clothes and gloves and put the burning candles into the bottom of the pool. If it doesn't go out, it means there is no lack of oxygen in the pool. The water supply pool and water tank are equipped with 36V line lamps for lighting. Cleaning and maintenance personnel enter the pool to work.

3. The pool cleaning personnel scrubbed the hexahedral pool (box) horizontally and vertically for three times, and the maintenance personnel repaired the pipeline, floating ball and water level controller of the pool (box). After cleaning, drain the sewage in the water tank (box), and then sprinkle bleaching essence into the water tank (box) for disinfection.

4. After half an hour, enter the pool (box) again for washing. After disinfection for three times, remove the sludge at the bottom of the pool and pump out the accumulated water in the pool with submersible pump. When cleaning the pool, another person is responsible for repairing and cleaning the fastening valve, cleaning the filter screen and checking the electrical control circuit.

5, check whether all kinds of facilities are normal, water into the pool, water samples sent to the city health and epidemic prevention testing station for testing. Cover and lock the swimming pool. Pack up the relevant work tools and clean the environment around the pool.

Step 3 keep the bathroom clean

1. Anti-seepage and anti-mildew measures

Considering that the bathroom walls are mostly ceramic tiles, in order to ensure long-term cleanliness and brightness, you can choose multifunctional decontamination stickers for daily maintenance. For the gaps between tiles, you can use a toothbrush dipped in a little decontamination paste to remove them, and then use a brush to brush waterproofing agent at the gaps between tiles to prevent water seepage and mildew.

Clean glass

The mirror and window glass in the bathroom are prone to produce watermarks and become blurred under the condition of long-term contact with water vapor. Choosing the correct cleaning method can achieve good cleaning effect on the premise of maintaining the glass. For example, using spray-type glass cleaner or wiping with old newspapers can make the glass as bright as ever to remove all stubborn dirt.

Clean faucet

Different from glass, the faucet in the bathroom is often in contact with shower gel, shampoo and detergent, which is easily influenced by various washing products and becomes dull. Therefore, in the cleaning and maintenance of the faucet, you can wipe the faucet with soft cotton cloth dipped in neutral detergent every week, and don't wipe the faucet with steel wire or acid cleaner to avoid damage.

Clean the toilet

With regard to toilet maintenance, in daily life, you can use 5- 10 ml detergent or hydrochloric acid to clean and pour it into the toilet, then smear it evenly and brush it again.

5. Ceramic cleaning

Cleaning sanitary ware with white vinegar and lemon peel is the best method, which is convenient and environmentally friendly. Specifically, after wiping the surface of sanitary ware, dip a soft cloth in white vinegar or wipe it with lemon peel.

6. The bathroom is deodorized

Long-term use of the bathroom will inevitably produce some odor. In order to avoid affecting daily life, it is very important to remove the odor in time. Specifically, potted plants or an elegant fragrance can be used to improve the air.