Butterfly headdress tutorial

Butterfly headdress tutorial tutorial is as follows:

Preparation materials: white 2cm ribbon, black 2.5cm ribbon, hot melt adhesive, hair clips.

Steps:

1. Cut the ribbon first. Cut the ribbon to twice the required size. White is 2cm smaller than black, and the usual size is about 15cm.

2. Use a lighter to burn the edge to prevent thread loss, and move quickly so that the edge will be straight.

3. Cut the black ribbon and fold it in half. Double-sided tape is used in the middle, and both ends are folded in half and bonded; Bonding surface. Do the same thing on the other side.

4, two black and two white, black into a cross, set the position. Make a shape around a thin line in the middle, and two white ones are stacked together. Similarly, wrap a thin wire around the middle position and fix it. White on black; Tie them together and cut off the extra thread.

5, black ribbon, folded in half on both sides to the middle, folded into thin strips.

6. Tie a knot in the middle and tie it in the middle of the tied butterfly. Cut off the redundant part and burn the edge part with a lighter; Fix the tail together with hot melt adhesive.

7. Remove elastic belt from the card. Glue the main part of the hairpin with the finished bow with hot melt adhesive; Press by hand to reinforce.