What is the initial password of intelligent access control?

One? How to use the access control integrated machine: swipe the card directly in the sensing area or enter the corresponding door opening password+"#" key.

Two? Programming description of access control integrated machine:

1? Enter programming mode

Press the "*" key, enter the 8-digit system password (default: 12345678), and then press the "#" key, the light will always be on (green), and the access control integrated machine will enter the programming state.

The following commands can only be executed in the programming state. After each command is completed, you must exit the programming state first (press the "*" key, the mode light will go out, the entrance guard will exit the programming state, or the mode light will go out, the entrance guard will exit the programming state, and after 15 seconds, do nothing and enter the normal working state) before executing other commands!

2 ? Modify the delay time of door opening (effective in programming mode)

(1) Press "0" and "#" to confirm.

(2) Press "5" (indicating a delay of 5 seconds, the delay range is 1-255 seconds, and the system defaults to 5 seconds).

(3) Press "#" to confirm that the delay setting is successful.

3 ? Modify the system password (the card is valid in programming mode)

(1) Press "1" and "#" to confirm.

(2) Enter an 8-digit password.

(3) Press "#" to confirm that the password was successfully modified.