Skills and methods of making doors

Skills and methods of making doors, talk about the making of indoor doors. For some people, this topic may be boring, so it is a matter of self-entertainment. "Making doors" refers to buying wooden doors and doorframes from the market and then installing them. When we needed a door at home, we had to do it ourselves. Let's take a look at the skills and methods of making doors.

Skills and methods of making doors 1 1. Check the specifications, opening direction and related accessories of the door according to the design drawings.

2. Measure the height and width of the doorway with a tape measure. The standard height and width of the door are 200cm×80cm；; The height and width of the bathroom door are 200cm×70cm. If the size is different, it should be corrected in time.

3. Measure the position line and determine the position of the door frame. Play the vertical line with Mo Dou and play two vertical lines on one side of the door.

4. Drill holes in the vertical line with an impact drill. The hole spacing is about 30cm, and one side door has two rows of *** 10 holes. The impact drill bit should be 12mm, and the drilling depth is about 6cm.

5. Nail the Xiao Mu wedge into the eyelet one by one with a hammer to fix the door frame plate. The volume of Xiao Mu wedge is 5cm× 1.5cm× 1.5cm, and it is best to make it from larch, because the wood structure of larch is compact and not easy to loosen.

6. Cut and make the door frame. The blockboard size of the left and right door frame keels is 200cm×3cm×8cm, and the blockboard size of the door frame top keels is 80cm×3cm×8cm. Glue the high-density Jiuli board to the keel, and then fix it with steam gun nails.

7. Connect the three door frames according to the shape of the door and fix them with big nails.

8. Plane the surface of the connected door frame with a plane, and trim the edges and corners.

9, put the door frame at the door, according to the horizontal line of metope, under the door frame mat board or brick, adjust the height of the door frame. 5cm is reserved below and buried in the floor keel.

10, nail a nail at the top of the door frame, hang up the thread, adjust the verticality of the door frame by hanging up the thread, and fix the door frame on the door opening with screws while measuring.

1 1, and make the frontispiece line. The frontispiece can be bought off-the-shelf or made by construction workers according to drawings. After the production is completed, fix the facade on the door frame, so that the door cover is basically completed.

12, put the door on the door cover, make gestures to determine the specific position of the hinge on the door cover, and then cut out the caliber according to the thickness of the hinge. And cut out the diameter of the lock sleeve. Install the door to the door cover and tighten the copper wire nail with a copper wire knife. Note that the gap between the door and the door cover shall not be greater than1.5mm, subject to the smooth opening and closing of the door.

13, remove the attachments, dust and stolen goods on the surface of the door cover, and then apply putty. Before applying putty, stick masking paper between the front of the scroll and the wall to prevent touching the wall when painting. Be sure to apply putty evenly and repair the nail hole on the door cover.

14, painting. The painting effect will be more delicate, and details can be brushed with a brush.

15. Install the lock on the lock hole, taking care not to damage the paint.

Doors. Skill method 2 1, batching cutting: step 1, choose wood square materials when batching;

2. Planing: Before planing, it is advisable to choose a material surface with clear texture, no scars and few problems as the front. When planing, you should see the straight and reverse lines of wood clearly, and plan along the grain to avoid friction;

3. Marking: Look at the size and form of tenon and eye before marking, that is, where to tenon and where to chisel the eye);

4. Chiseling: choose a chisel equal to the eye width, which is the key to ensure the tenon and accurate eye size);

5. Chamfering and cutting: Chamfering and cutting are carried out on the door frame. Chamfering mainly plays a decorative role, and cutting plays a limiting role when the door leaf is closed);

6, tenon and broken shoulder: tenon is also called inverted tenon, that is, the longitudinal line of tenon is sawed off. When the tenon root is sawed, the saw should be sawed vertically several times, but it can't see through the line);

7. Assembly: Before assembling door and window frames and fans, the front faces of all parts should be selected. Once assembled, the front face is on the same side, and the lines that cannot be planed on the front face after assembly should be polished with sandpaper;

8. Clean the surface: the wood must be dried many times before use. The moisture loss after drying is 15%, which means that the weight of wood will be reduced by 15%. Wooden door assembly;

9. Sanding: scrape and grind before painting, and scrape and grind with more than ten kinds of scraping and grinding tools to make the wooden door smooth. After scraping is completed, it should be polished with sandpaper with different mesh numbers to make the wooden door feel delicate.

10. Paint: brush the asphalt once to prevent surface corrosion. Finally, paint and dry.

Skills and methods of making doors 3 How do carpenters make doors-What is the method of making doors by carpenters?

1, making door core: Woodworking doors are made of solid door core with Chinese fir or white pine as the main material. After drying, the moisture content of door core wood is strictly controlled and it is not easy to deform.

2. Making convex and concave shapes: Woodworking doors are made of high-quality density boards, and the door panels with three-dimensional shapes are made by sawing, planing and milling.

3. Installation of balance layer: MDF is integrated with the main material of the door core after being pressurized at high temperature by a hot press, which not only ensures the overall stability and flatness of the woodworking door, but also solves the problems of cracking and deformation.

4. Single panel: the veneer of solid wood is pressed to a thickness of 0.6mm to ensure the consistency of the overall appearance of the door, such as walnut, cherry, Sabili, maple, oak, teak, rosewood, shadow wood and crape myrtle.

5. Painting: The woodworker polished and painted the door surface for more than ten times, and the top coat of the high-quality wooden door was made of high-quality polyester paint painted by a professional factory. The paint surface is fine, smooth and free of sand and other defects.

How to Make Doors for Woodworking —— Factors to Consider for Woodworking Doors

Generally speaking, finished doors are industrialized, especially the manufacturers of famous wooden doors have relatively large-scale production machinery and equipment, which are mature in wood drying, finger joint, flatness and painting assembly line. Woodworking doors are mostly made of large core board (joinery) and plywood, which can't reach the production level of mechanical equipment, so the finished door is better from the perspective of exquisiteness and detail.

In fact, the requirements for paint construction are relatively high. Manual on-site painting can achieve less dust, but it is difficult (even impossible) to achieve a dust-free environment. The polishing of paint is different from the number of times, and the effect is definitely different. The fineness of mechanical polishing and painting construction is definitely different from that of manual polishing and painting construction by workers. Therefore, doors made in factories are often painted better than those made by hand.

How a carpenter makes a door should be designed and made according to the size of the door in the family room, so it is more appropriate to customize the door. Wooden doors should be maintained at ordinary times, cleaned and maintained regularly to avoid some sharp tools scratching wooden doors, and attention should also be paid to moisture-proof work at ordinary times.