How to set up TP-LINK enterprise routing?

How to set up TP-LINK enterprise routing is as follows:

1. After logging in to the router, click Object Management. First of all, we set up a set of IP address pool for vpn dial-up terminals, which can be used by clients after successful dialing. Note: lan_pool is the address pool of internal dhcp and pptp2 is the address pool of vpn.

2. Then click the VPN entry on the left and select PPTP protocol to enter the setting interface of PPTP server.

3. The local address must be an unused ip address in the local LAN. Binding domain is the binding port where fixed ip or dynamic domain name is located. I have four lines to dial online at the same time, so I chose one. Select PPTP2 for the address pool.

4. After successful 4.VPN dialing, you can view the dialing information of the connection in the tunnel information of PPTP server, indicating that the connection is successful.

This solves the problem of how to set up TP-LINK enterprise version routing.