Methods and steps of drawing elevation in CAD

Facade can generally be drawn with the two-dimensional function of CAD, and everyone can master it. In fact, the method is very simple. Let me tell you how to draw an elevation with CAD. Come and learn from me.

The method of drawing elevation in CAD 1 This is a plan. Now we should draw the elevation of the TV wall.

The steps of drawing elevation in CAD 1 2. Copy all the walls, as shown in the figure below, and delete the redundant ones. This is convenient for drawing.

CAD steps draw an elevation in figure 2? 3. Below you can see the effect of deleting the outside.

Drawing elevation in CAD Step 3? You can check the length by marking. It is 6280mm long and 2750mm high. Generally, the height is 2750 mm or a little higher, so you can decide for yourself.

What are the steps of drawing elevation in CAD Figure 4? 5. Draw the picture below. The height above is 150, which is the ceiling, and the height below is 50, which is the skirting line.

What are the steps of drawing elevation in CAD Figure 5? 6. The width here is 3200mm, and the height of the door is generally around 2000mm.

What are the steps of drawing elevation in CAD Figure 6? 7. As can be seen from the picture below, just draw the width of the door of 825 and follow the size. Be flexible, more or less.

What are the steps of drawing elevation in CAD Figure 7? 8. After drawing the above, you can draw the TV wall. In fact, the TV wall is very easy to draw, as shown below.

What are the steps of drawing elevation in CAD Figure 8? 9. As shown below, the width is 630.

What are the steps of drawing elevation in CAD Figure 9? 10, draw the box of the TV set, and the counter below can also draw the following picture, which is also flexible here.

What are the steps of drawing elevation in CAD 10? 1 1.cctv is being marked as a TV symbol.

The steps of drawing elevation in CAD 1 1? 12. Press the H space bar and the pattern fill will come out. Here, jis_rc_ 10 with a ratio of 5 is selected.

What are the steps of drawing elevation in CAD 12? 13. In the figure below, the pattern is cork and the wall ratio is 15.

What are the steps of drawing elevation in CAD 13? 14. After entering multiple quotation marks, you can see the ceiling, as shown below.

What are the steps of drawing elevation in CAD 14? 15. As shown below, you can see the effect of drawing the facade here. The principle here is the same, you can draw slowly.

The steps of drawing elevation in CAD 15