How to drift the U-shaped curve in QQ flying car perfectly? Please elaborate.

1.↑+→

2. = +→ 2. = +→+Shift (light shift, the shorter the time, the better)

3. ↓↓↓ (Click to shift gears and turn back immediately, at a faster speed)

Step 4 write (fire)

(1-3 steps must be connected quickly)

2. Double spraying

1.= +→+shift (optimized drift) [first drift]

2. Writing (reverse)

3.→+Shift (the shorter the two keys, the better) 【 second drift 】

4.↓+↓ (Turn back immediately and fire for the first time)

5. Write (the second fire)

(Two drifting wheel patterns cannot be connected together, and the interval between two drifting wheel patterns cannot be too large. )

Three. Continuous spraying

1.= +→+shift (optimized drift)

2. Writing (reverse)

3.→+Shift (the shorter the two keys, the better)

4.↓+↓ (Turn back and spray fire immediately)

5.→+Shift

6.↑+←

... repeat 3 or 4 steps.

Eventually =

(Continuous spraying is the continuation of double spraying, and double spraying is repeated)

Four. Out-of-position double injection one

1.=→+Shift (press at the same time)

2.shift

(Pull back the front of the car)

3. Write +Shift (press) fire at the same time.

4.= Spitfire 5. Out-of-position double injection 2

1.(shift+↑+→)

2.(↑+←+shift)

3.(shift+→)

4.(=+←+Shift) Fire breathing

5. (Write) Fire-breathing

Out-of-position double injection has a wide range of applications, from straight lines to large U-bends and even S-bends. Moreover, the gas collection capacity is more than that of ordinary double-jet, and it can be pulled back to the front of the car in time when it floats on the head. The first off-site double injection is relatively simple, and the second is relatively difficult.