How to wear armor to be stronger?

If you want to wear armor more firmly, you need to master the correct way to wear it.

Gently polish the nail surface with a sand bar several times to ensure that there are no bright spots on the nail surface, so that the nail can fit the nail better. Then you need to paste the appropriate jelly glue according to the shape and size of your nails. Good quality jelly is very sticky and can last for a week and a half months.

Put the grooved side of the nail down, hold the front edge of the nail and press it backwards, so that the air inside the nail can be squeezed out, and the pasted nail will be stronger. Pay attention to ensure that the nails can fit perfectly on both sides of the nails and wipe off the dust on the nails with dry cotton cloth. After that, don't dip the finger wearing armor into cleaning solution or alcohol at will, otherwise the surface of armor will be corroded and turned white.

Armor removal method

1. Adhesive: When removing the nail, soak it in warm water for about 30 seconds, tilt one edge of the nail with a small stick, and inject the adhesive remover so that the adhesive remover extends into the nail along the stick. After standing for about 10 second, the armor naturally falls off. At this point, wipe off the glue on the nail with a rubbing strip, and finally wipe it with alcohol cotton.

2, jelly paste: When removing nails, you can first prepare a pot of warm water and soak your hands in it for 5 minutes. Then use a small wooden stick to find the gap between the nail plate and the nail plate, poke it in and slowly push the nail plate down. After the nail plate is pushed down, there will be residual jelly glue on the nail plate and nail plate, and we can roll it down bit by bit with a small stick.