Structure introduction of common solid wood composite doors

Solid wood composite doors are mainly made of natural solid wood skin, wood grain paper, PVC and other materials. Natural solid wood skin is the best and most expensive of the three. The wood skin covered with natural wood skin on the surface of solid wood composite paint door is usually some precious wood, and the wood grain is the natural wood grain of wood. After several years of development, the technology of solid wood composite doors has become very mature and has become the mainstream of bedroom doors. However, many friends don't know much about it. Let's take a look at the structure of solid wood composite doors in Bian Xiao.

Structure introduction of common solid wood composite doors

The first one is the door core. The door core is made of high-quality Chinese fir as the main material of the door. After drying and scientific treatment, the moisture content of door core pine has been strictly controlled, and it is not easy to deform and has high flatness. It is a kind of high-quality wood door aggregate.

The second type is concave-convex door panel. Using high quality and high density, the solid door panel core material is cut, planed and specially made, and then the 0.6mm solid wood veneer is coated by vacuum laminating machine at high temperature and high pressure.

The third is the balance layer. The medium density board is integrated with the main material of the door core after being pressurized by a hot press at high temperature, which not only ensures the overall stability and flatness, but also solves the problem of cracking and deformation.

The fourth is the surface. External pressure paste wood grain paper or 0. 6mm thick veneer ensures the consistency of the overall appearance of the wooden door structure. Such as walnut, cherry, Sabili, maple, oak, teak, sour branch, shadow wood, crape myrtle, etc.

The fifth is paint. The surface has been treated by more than 8 processes, and the top coat is made of high-quality environmental protection polyester paint. And painted by a professional factory to ensure that the paint film is fine and smooth.

The sixth is the setting of wires. The door cover is made of MDF, and the surface is wood grain paper or 0. 6mm solid wood veneer, factory painted.

The seventh is the thread of the door. Generally, it is a density board with a thickness of 10mm and a width of 60nm.

The eighth is thick material. A, Chinese fir is good in material, natural and fragrant, difficult to deform, low in moisture content, less in trunk than pine, and free of oil, so it is the best choice for wood door structural aggregate. B MDF: It is made of reinforced floor, with the largest amount of materials. The advantages of high-quality MDF, such as high strength, good stability, good flatness and environmental protection, have been recognized by the society and cannot be replaced by other materials. The balance layer material of composite wooden door structure must have these characteristics to ensure the excellent appearance and practical performance of the product. C, veneer is changed according to the different preferences of consumers.