How to make a plant wound healing agent?

Self-made method of plant wound healing agent

1. Prepare 10g of "5% carbendazim" powder, and a large 6000cc family-sized Potter bottle filled with 90% water (about 5000cc) for standby, or prepare a 1500cc Potter bottle filled with water for standby. Dilution operation.

2. Pour "5% carbendazim powder" into a bottle filled with water and dilute it into 500 times aqueous solution. Pour in lime powder.

3. After preparing the keg and the stirring rod, pour an appropriate amount of ordinary lime powder into the keg. Pour 5% carbendazim water solution.

4. Pour the aforementioned "5% carbendazim 500 times aqueous solution" into a small bucket. Mix evenly.

5. After mixing, it is the "wound protection agent". There are all kinds of inks.

6. Prepare the "wound protection agent" as mentioned above, then take out the "ink" (natural products: black, green, red, blue and other colors) and pour it in.

Extended data:

Matters needing attention

1, there is a small amount of delamination after long-term suffering, which is a normal phenomenon and will not affect the effect when used.

2, for rot, dry rot, scrape out and then smear.

3. For the unhealed girdle, a new skin can be scraped slightly and then smeared.

4. Surface drying time: 2-3 hours on dry sunny days and 4-5 hours on wet cloudy days. If it's not dry, brush it in case it rains.

5, unfavorable besmear brushs too thick, with a thin layer of uniform coating.