How to make and maintain stainless steel railings?

Handrails and handrails are common in our daily life. As long as there are stairs or steps at home, you can see railings and handrails. They are the support bars of the stair guardrail, which can not only protect people's personal safety, but also play a certain role in decorating and beautifying the stairs. For railings, we usually only see the process from scratch and have never seen how it is made, so you must be curious. Today, I will tell you in detail how stainless steel railings are made and how to maintain them in the future.

Manufacturing steps of stainless steel railings and handrails

1, the manufacture of stainless steel stair handrails needs to be designed according to the actual stair model. First, select a material model. Stair handrails generally adopt the model type, and generally choose 202 or 304. The thickness of each pipe depends on your actual needs. Do the first step of selecting materials, and then we design the height. ? Note: I'm talking about the handrail method with the ball on the column, and there are also elbows, which is different from the ball method.

2. Stair measurement statistics, and then according to these data for pipe cutting, including the height of the upper and lower columns, generally around 85 cm, is a safe height. Then punch holes in the stair floor, drive in expansion screws and tighten them, then install and weld the previously cut columns on the driven expansion screws, and measure whether they are vertical and beautiful with a level.

3. After all the columns are welded, we begin to measure the length between the columns, then cut the face pipe according to the data, polish the joint and weld it, so that the basic skeleton of the stair handrail is completed after welding, then divide the stairs without floor evenly into several pieces and mark them, prepare a pen and paper, measure the height between the face pipe and the ground support column according to the divided marks, record it, then cut and grind the mouth, then punch holes in the ground, and drive expansion screws to tighten it. 4.8 or 5. 1 pipe for pillar.

4. After the joists are welded, start measuring the spacing between each joist. After measuring the flat tube, cut it, and then punch the dividing line. Generally, a flat tube made of 3.2 material is used, and then a twig is inserted in the hole of the flat tube. Generally, a thin tube of 1.9 is inserted up and down and fixed in the middle of the joist. Welding will do. ? Note: According to your hobby, you can add some stainless steel auspicious patterns or font accessories to increase your aesthetics.

5. Finally, check whether the handrail is firm, and spray anti-rust paint on the handrail after the temperature at the welding place drops.

Maintenance of stainless steel railings and handrails

1, don't scrub stainless steel stair handrails with steel velvet. Scrubbing with steel wool may make metal particles adhere to the basin wall, which will easily lead to rust spots after a long time and affect the service life of the basin.

2. Clean railings and handrails, and avoid using steel brushes or rough brushes to avoid scratching the surface of stainless steel stair handrails.

Please clean the stainless steel handrail with sponge or cloth. If cleaning with detergent, choose neutral detergent and gently scrub.

4. Try not to use rubber pads for stainless steel stair handrails, because the dirt under the rubber pads is difficult to clean.

5. The surface of the stainless steel stair handrail should not contact with heavy metal-containing water (heavy water), because the heavy metal-containing water will discolor the stainless steel stair handrail or produce rust spots. If this happens, please immediately dry the stainless steel stair handrail with a towel.

6. Stainless steel stair handrails should try to avoid contact with strong floating objects, household chemicals and soap. In case of the above situation, immediately wash it with water and dry it with a towel.

For a house with stairs, handrails are very important and indispensable equipment in the decoration process. They are usually installed on both sides of stairs. The common materials of handrails are wooden handrails, stainless steel handrails and aluminum alloy handrails, and the prices are different according to different materials. Wooden railings and handrails are generally installed in their own rooms, which are noble and elegant and easy to maintain. Generally, stainless steel and aluminum alloy handrails are installed in corridors, which are relatively firm. Through the above introduction, I believe everyone should be more clear about the production and maintenance of stainless steel railings.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~