How to knit Chinese knots

How to knit Chinese knots step by step

The knitting method of Chinese knots is as follows:

Tool material: red rope

Operation method:

0 1 Take a red rope, preferably hard. ?

Fold the rope in half and place it as shown below. ?

Fold down the top cover as shown. Be sure to fold like the yellow area in the picture, with a circle, and don't fold directly. ?

Fold the right head again, as shown in the figure below. ?

Then fold the two tails at the bottom. ?

Then fold the left head over and pass through the place shown below. ?

Tighten three heads. Turn the tail down and continue to fold it like the first time. ?

Turn it over, tighten the three heads and tails, adjust the tightness, pull out four semicircles and straighten it. A simple Chinese knot will be done. ? It is especially recommended that the rope should not be too soft and the color should be single, otherwise the tightness of the texture should be adjusted.

How to weave Chinese knots? Step inventory

Chinese knot is a kind of culture and a kind of feeling. During the Spring Festival, we can almost see Chinese knots in the streets and supermarkets. Chinese knot is an ancient culture that has lasted for thousands of years. It symbolizes the prosperity of a country. Chinese knot is also a craft, which gradually declines with the progress of the times. There are fewer and fewer people who can tie Chinese knots now. The practice of Chinese knots is very complicated, but there are certain rules. Let's see how Chinese knots are woven.

I. Raw materials

The raw material we want to prepare is the thick red thread of Chinese knot. Generally speaking, depending on how big a Chinese knot you want to knit, the jade thread of 1, 2 and 3 is the thickest and largest. This kind of jade thread is used to knit big Chinese knots. It's best to use No.4 jade thread when you are just learning to make Chinese knots. No.4 jade line is moderate, neither too thick nor too thin, suitable for beginners to practice.

Second, the methods and steps of knitting Chinese knots

1, take a piece of jade thread with enough length. The length of jade thread generally needed for Chinese knots is 100 cm. The length of the thread is determined according to the thickness and the number of Chinese knots. Let's make a simple 40% Chinese knot. Fold the jade line in half, tie a lucky knot or snake knot, and divide the jade line into two strands. 16 needles are arranged on the needle board, and the thread is wound around the needles one by one.

Next, our thread hangs at the left and right ends of the needle. Now the line on the right passes through the jade line from top to bottom, and the shape is wrapped. Press directly from above and pull out from below. This step does not require any pressing, and each knot can be pulled out like this.

3. Next, the one on the left starts from left to right and walks all the lines one by one. After passing through, the thread will appear on the right. Take the thread on the right and start to go out from the right by pressing and picking. Four rounds of long knots need four rounds to go back and forth. After pulling out, take out all the needles and start pulling out the shape of the Chinese knot.

In the process of drawing shapes, you need to be extra careful. If the shape is not well drawn, it will be done for nothing. When drawing a shape, pay attention to pulling out those ear wings and be symmetrical. After painting, a long knot with four circles is finished.

Bian Xiao, how to make Chinese knots has been introduced to you. After reading Bian Xiao's tutorial, do you know how to make Chinese knots? There are many kinds of Chinese knots besides 40% long knots, and there are dozens of them at most, which are very large Chinese knots. Besides these shapes, there are some rectangular and heart-shaped Chinese knots. Chinese knots have various shapes, which is a profound knowledge. Everyone needs patience to learn Chinese knots, because it is difficult at first, so you should find your own rules.

Chinese knot knitting method steps

The Chinese knot knitting method comprises the following steps

1. Prepare a rope 1 meter long, fold the rope in half, and press the folded part between the index finger and the middle finger. The rope of the left hand is wound between the index finger and the thumb, and the rope of the right hand is wound between the middle finger and the ring finger. The shape, color and accessories of the knot should be properly matched and the size should be appropriate. Both ends of the line can be wrapped with tape or made hard and straight. At the beginning, the interval between lines can be wider. When the lines are complicated, they can be fixed with bead needles.

Second, tie a knot counterclockwise, press the rope ends backwards, one by one, and then put the last rope end through the first lap. Don't hold the thread too tightly. Tie a knot, adjust the thread with crochet or tweezers, pay attention to the beautiful knot shape and collocation, clearly know which thread to draw first and keep a few knots, trim the thread with the same color, and sew the loose part firmly. Set matching beads to add beauty to the knot.

Third, tie the knot clockwise. This time, press the rope head clockwise and backward, and then put the last rope head through the first circle to identify the position of the line. If there is any mistake, it should be adjusted immediately. You can make a simple summary at the end of the knot, or you can wear beads or ornaments. The thread ends should be hidden so as not to spoil the aesthetic feeling.

How to weave Chinese knots?

There are many ways to weave Chinese knots. Let's share the knitting method of sparrow's head knot:

Tools/materials: a rope, adhesive tape.

1. Fix the rope to facilitate knotting. For the sake of clarity, the rope is divided into end A and end B, as shown in the figure below.

2. The B end passes under the A end, as shown in the figure below.

3. End B passes through the top of end A and comes out of the circle formed by end A and end B, as shown in the following figure.

4. The B end passes above the A end, as shown in the figure below.

5. The end B passes under the end A, above the end A, through another coil formed by the end B and the end A, and then tighten the end B, as shown in the figure below.

6. Repeat the following steps according to the above method, and then adjust the tightness of the knot to complete the knitting, as shown in the figure below.

How to weave Chinese knots?

First, hold the middle position of the rope, as shown:

Second, bend the middle and press the ring on the right, as shown in the figure:

Third, turn the right ring to the left, as shown:

4. Fold the lower end upwards and press it on the right ring, as shown in the figure:

5. Turn the left ring down to the right and press it on the top of the turned rope, as shown in the figure:

Six, at this time, there are four heads in the ring, as shown:

7. Continue to use the same method to form the appearance of Figure 7, as shown in the figure:

Eight, tighten the four heads evenly around, and then the Chinese knot is successfully completed, as shown in the figure: