Distinguish the authenticity of zippo constellation _ Is Zippo constellation fake?

Identification method of zippo lighter

Lead: What are the main aspects to identify the authenticity of ZIPPO lighters? Mainly from what aspects, with a very direct and simple method to identify the authenticity.

Zippo lighter 1 authentication method. Appearance:

There is a circular gravure print on the hinge of genuine Zippo lighter, which is difficult to be exactly the same in imitation, and can be used as a basis for judgment.

2. Quality:

Imitations are generally heavier than genuine Zippo. This is because the imitation is made of low-grade steel or iron, and the shell thickness needs to be increased to ensure the hardness, so it is heavier than the real one. Open the top cover of the lighter, and you can easily see that the shell of the imitation is much thicker than the real one.

3. Windshield:

Comparing two identical machines, the gap width on both sides of the imitation windshield is different, some are wider and some are narrower, while the gap width on both sides of the same cold pheasant liner windshield is the same.

4. Tap the steam wheel:

Zippo's lighter wheel has been patented from design to material, and made of special materials with special patterns, which ensures that enough Mars can be shot at one time and is durable. The texture on the lighter wheel is the upper layer.

Tilt from right to left, lower layer from left to right, clear texture. Generally, imitations have only one layer of texture or the texture is not clear. Some imitations even use the stripes of disposable lighters.

5. Rivets:

Rivets at the ignition wheel and cam of genuine liner are white, while imitations are generally * *. The seats for fixing real flint are copper, so they are all * *, and the imitation seats are generally plated with silver together.

6. cotton pad:

Genuine Zippo cotton pad is very thick, which can be as thick as 0.7cm under normal circumstances. General imitations can't do it. There is a small hole 1mm on the cotton pad, and a fence (1) is reserved.

7. Flint:

Generally, the screws for loading and unloading flint can be easily unscrewed by hand or coins, but the imitation screws often need a screwdriver to be screwed on. The real flint and the handle under the flint are all gold, the surface of the joint is very flat, and the imitation is generally gray.

8. Cotton balls:

Authentic Zippo cotton balls are five small pieces, and imitations are generally a whole piece.

9. Flame:

When the imitation burns, it emits blue smoke and the flame flickers on and off. The whole fuselage caught fire in less than 4 minutes. The real thing won't ignite the fuselage until the fuel runs out. This is because the general imitation steel cover is too thick and the heat dissipation effect is poor; The oil storage cotton core in the machine is of poor quality and easy to leak oil.

In fact, in terms of workmanship, the difference between genuine products and imitations is too great. After playing with several genuine friends, it is easy to tell the genuine from the fake. The above mentioned is only the most obvious quality difference, for the reference of friends who have never used Zippo. It's genuine Zippo. We can send it to Zippo's American headquarters for repair, whether it is parallel or licensed. Unlike other products, parallel imports cannot enjoy warranty service.

As the core of ZIPPO, lighter wheel can really be used as an important means to identify authenticity. ZIPPO lighter wheel has a special twill, which feels good and durable. However, if the counterfeiter uses the inner container of real ZIPPO, this article is completely invalid. Whether it is clear or not is widely circulated on the Internet as the basis for identification. I think this underestimates the counterfeiters. Is it in circulation in the market? High imitation? It is also unrecognizable by this. On the other hand, in some cases, the bottom mark will have some uncomfortable feelings, such as the bottom of the nail machine often feels uneven and so on.