How to fold the gift box, how to fold the beautiful gift box.

How to fold the gift box, exquisite illustration of the folding steps of the gift box, amazing illustration of DIY folding gift box, how to fold the gift box, and how to fold the small fresh gift box. Take a square piece of paper, align the four corners, fold it in half, fold both sides to the middle, fold the lower side obliquely, and fold it down to the center line and the other side.

Fold the bottom edge to the top, the two sides to the middle, and change the bottom to the top. After cutting, fold a piece diagonally. After folding three pieces, you can splice them.

First take out two pieces from the corner and plug the third piece. The upper corner is arranged like a small box inside. The upper corner can be used as a cover. If you feel good, make one yourself!

Illustrative steps/methods of how to package gift boxes

& gt0 1 Cut the wrapping paper into +2 ~ 3cm long and +3cm wide near the box, with the bottom of the box facing upward and in the center of the paper.

& gt Fold the right paper inward along the box and keep the edge of the paper in the center of the box.

& gt Fold the paper on the left again.

& gt Use transparent adhesive or double-sided tape to fix the overlapping parts of paper.

& gt The paper on both sides is folded inward along the box.

& gt06 Fold the paper into a beautiful trapezoid in sequence.

& gt mark the joint of upper and lower origami lightly.

& gt Keep the mark parallel to the edge and fold the paper under it.

& gt Fix the joint with double-sided adhesive tape or beautiful sticker, then wrap the other bread, turn it to the front of the box and decorate it with ribbons or flowers.

:jingyan . Baidu ./article/aa 6a 2c 143 1f 4530d 4c 19 c43f。

Hello, the above is a schematic diagram.

Handmade origami snowflakes explain how to fold a hexagonal gift box in the shape of Christmas snowflakes. Just before I saw a video tutorial on how to fold snowflakes, I want to share it with you.

: beep, beep. /video/av7689460/

: beep, beep. /video/av7767937/

How to make a gift box in a few minutes? Find a box that matches the gift. If the box is dirty or ugly, buy wrapping paper (two kinds) bigger than the box. Measure the size of the box with a wrapping paper (measured with a ruler) and then stick it with glue. After you glue the gift, put it in the box. Wrapped in another kind of wrapping paper, it is spread from front to side, from side to back, and then from back to the other side. The paper on the side is spread out to the front (overlapping part), and the double-sided adhesive tape is stuck from the inside of the end of the wrapping paper (the outermost edge of the paper). Cut the other two sides of paper with opposite linings and stick them on it. Finally, stick it on the front (diagonally opposite to the upper left) with flowers.

What are the steps to package a gift box? In order to explain the packaging procedure conveniently, we call the relatively long and flat sides around the box edges, and the shorter ends in front and back are called the tail ends. When measuring the required wrapping paper, make sure that the wrapping paper is enough to cover the sides and ends of the box, plus about one inch of folding space. It is recommended that you adopt the following simple measurement methods:

Unfold the whole wrapping paper. Put the box in the wrapping paper, about an inch away from the edge (the side of the box closest to the edge of the wrapping paper is called a). Then move the box inward along the edge to make sure there is enough wrapping paper at the end of the box.

Turn the box over three times to make sure all sides touch the wrapping paper. A should be moved closer to the center of the wrapping paper. Now you can cut the wrapping paper you need along line A. ..

Generally speaking, if you are not sure how much paper to cut, the best way is to cut more rather than less, and you can cut off the excess parts when packaging. But if the paper is not big enough, you will have a headache. ......

paper cutting

When cutting paper, the most important principle is to measure clearly and cut straight.

Measure the required wrapping paper first, then cut a small incision and write down where to cut it. Then take out the box and make sure it is cut straight.

Fold the wrapping paper in half, and the folded part should be where you make a small incision. Then put the blade on one side of the scissors into the fold and cut the required paper in a linear motion. If the paper is stuck in the middle, stop cutting the paper immediately, cut the stuck part with short cutting method first, and then continue cutting the remaining paper.

Another paper-cutting method: use a ruler or credit card to fold the folded part tightly, and then slowly tear the paper in half along the crease. Some wrapping paper may not tear easily. You can fold the paper back and forth several times along the crease, which reduces the toughness of the paper fibers and makes it easier to tear.

Gift packaging (1): side.

The following procedure seems complicated, but it is not difficult at all. As long as you refer to the explanation pattern and read the instructions, you can master the basic skills of packaging gifts. Place the box in the center of the wrapping paper, with the front of the box (that is, the opening part of the box) facing down. Pay special attention to packing fragile goods, and don't be too rude. Pay attention to the correct position of the box when packaging, that is, one side of the paper should be aligned with one side of the box, and both ends of the box should be aligned with both ends of the paper.

Fold the paper along the edge of the box. Fix the paper on the box with one hand and fold the paper tightly along the edge of the box with the other hand. You may also need to pull up the paper a little to make the surroundings of the gift smooth and tidy. Then use the cut tape to fix the wrapping paper on the box.

Fold the wrapping paper to the other side in the same way. The paper on this side should overlap with the previously pasted paper. Remember to tie the paper tightly to ensure that the surface of the gift is smooth and tidy. Stick the wrapping paper with another cut tape, preferably in the center of the box, along the length of the paper.

Note: the wrapping paper on this side should just cover the first wrapping paper and not exceed the edge of the box. If the length of the paper exceeds the edge of the box, cut off the extra part first, and then stick it with tape.

Gift Packaging (2): End

The principle of this lesson is that the tighter the gift is packaged, the more neat and beautiful the appearance will be.

Turn one of the front and rear ends of the box to yourself, and the back of the box is still facing up. Fold the paper up and down, and then fold it tightly along the edge of the box. Tape the wrapping paper to the box.

Fold the left and right sides of the paper inward and fold the paper tightly along the edge of the box. At this time, you will notice that the paper at the bottom forms an angle, which shows that your packaging steps are correct.

Carefully fold the other side of the paper inward. At this time, notice that the paper at the bottom has been automatically folded into a triangle or quadrilateral with inward inclination on the left and right sides. Fold the paper on this side along the edge of the box and stick it with tape.

If the length of the wrapping paper on the last side exceeds the edge of the box, you can fold the excess paper inward first and then fix it with adhesive tape. Turn the box around and fold the other end in the same way.

Add a bow

Most bows sold in the market are attached with tape. You just need to tear off the protective layer on the tape and stick the bow in the center of the gift or in the corner of the box.

If you are not sure where to put the bow, don't tear off the protective layer of the tape for the time being. First put the bow in different positions on the front of the gift, find out what you are most satisfied with, and then stick the bow on the gift. When trying to put the bow in different positions, I suggest you use your imagination boldly and design a unique embellishment method.

Add Ribbon (New Style)

This lesson will teach you how to decorate gifts with ribbons and bows. Illustrations and program explanations help you dress up your gifts beautifully!

First, tie one end of the ribbon to a corner of the gift, and then wrap the ribbon diagonally around this corner of the gift. Then pull the ribbon to the other end of the box and wrap it diagonally in the same way. At this point, this end of the ribbon should have returned to the original point, that is, the position of the ribbon previously fixed on the gift. Tie up the ribbon, tape it, and add a bow of the same color, and you're done.

Remember to tighten the ribbon when winding it, just like you wrap a gift. In this way, the packaged gift will be neat and beautiful.

Another method of winding ribbons is cross winding.

Prepare a ribbon twice the length of the gift. Turn the gift upside down, then wrap the ribbon around the bottom, pull it up and pass it through. Then turn the gift over 90 degrees to ensure that the ribbon is smooth and wrinkle-free. Tighten both ends of the ribbon to the front along both sides of the gift, then turn the gift 90 degrees, face up, tie a tight bow in the center of the box, and cut an inverted V-shaped dovetail at both ends of the ribbon (see key words).

If your packaging skills are good, you can also wrap the gift according to the instructions in Lesson 4 and Lesson 5, but don't fix it with any tape. The ribbon binding method above allows the wrapping paper to wrap the whole gift tightly. When the recipient unties the bow and ribbon, the wrapping paper will automatically spread out, giving your recipient an unexpected surprise!