Omega constellation series strap changes

1. First, open the button of the strap by hand, as shown in the figure below.

2. Then, pass the belt through the iron ring, as shown in the figure below.

3. Go straight to the position of the third hole, and then clip the strap edge into the buckle, as shown in the figure below.

4, this side should also be stuck in, as shown below.

5. In this way, the watchbands on both sides are clipped in, as shown in the figure below.

6. After the card is stuck, gently press the strap down with your hand, as shown in the figure below.

7. This is fixed, as shown in the figure below.

8. You can put on your watch, as shown in the picture below.

9. Just cover the iron cover at last, as shown below.

10, that's it. See the effect, as shown in the figure below.