Zodiac Wax _ Zodiac Wax Head

Wax seal is a kind of logo, which used to be printed on envelopes, but now it is less, but there are more exquisite people who will DIY wax seal themselves and then seal envelopes. There are four steps in the use of wax seal, and the materials needed are: seal, candle, spoon and wax. The following steps are used for wax sealing:

1. Cut the wax into pieces and pour it on paper. Cut the wax into small pieces and heat it on the fire. When the waxes are completely melted, pour them on the prepared paper.

2. After a few seconds, press the seal to finalize the design. After a few seconds, press the seal slowly, and take it away after the wax is basically set.

3. Remove the head ring and pour the wax, remove the sealing head, wrap it with paper tape and pour the melted wax.

4. Take it out after drying, and take out the wax after drying.

Waxes are usually in the form of wax sticks (traditional waxes), but some are waxes with cores and wax particles. When necessary, cut the wax stick into small pieces and put it in a small spoon. After heating and melting, pour it into the required envelope mouth and seal it.