Six ways to make Halloween garlands

Directory method 1: pumpkin wreath 1, buy small pumpkins. 2. Make the pumpkin into a ring and see how much money you need to make a wreath. 3. Dig a horizontal hole in each pumpkin. 4. Pass the No.20 steel wire through the hole of the first pumpkin. 5. Repeat this step until all pumpkins enter the garland skeleton. 6. Spread dry peat between pumpkins. 7. Tie a big bow tie at the top of the garland and let the long side hang under the garland. 8. There is a hook hanging on the wreath. Method 2: orange and black garland 1. Choose burlap or tulle as decoration. 2. Cut the burlap or tulle into strips. Tie a bunch of black cloth on the garland. 4. Continue to tie the cloth and replace it with orange and black. Step 5 add decoration. 6. Stick a ring on it and hang a wreath. 7. all right. Method 3: felt orange rose ring 1, choose orange felt. Step 2 design a wreath. 3. Roll the felt into a circle. 4. Make a spiral. 5. Roll up and tie the felt spiral. 6. The same is true for the rest of the roses. 7. Fix the roses on the wreath skeleton. 8. Fix a big bow at the top or bottom of the wreath. 9. Make a piece of cloth or belt into a circular hanger. 10, hanging on the wall or behind the glass door. Method 4: candy corn garland 1. Colour the wreath black. 2. Apply Mod Podge glue (a manual glue) to the black garland. 3. When heating, stick a circle of corn candy on the outer edge of the wreath skeleton. 4. Go back to the opposite direction and stick a circle of corn candy in the opposite direction. 5. repeat it. 6. Apply Modpod glue to the whole wreath to seal it. 7. Stick a layer of decorations on the bottom or top of the garland. 8. Tie a rope or something that can be wound on the top of the wreath and hang it at the door. 9. all right! Hang the wreath on the door. Method 5: pompon garland 1. Choose a color to make pompoms. 2. Decide the size of the pompoms. 3. Make pompoms with the selected colors. 4. Tie the pompoms to the wreath skeleton. 5. consider whether you need something extra. 6. Add a hook to the top of the wreath. 7. done. Halloween is a good time to hang garlands at the door. Whether you want to celebrate Halloween warmly or simply autumn, there are all kinds of good ways to make garlands in front of your door. Here are some suggestions.

Method 1: pumpkin wreath

1, buy pumpkin. Choose pumpkins with good colors, orange and yellow, so that people will like them when they see them.

2. Make the pumpkin into a ring and see how much money you need to make a wreath. You may need 14-20 or so, depending on the size of the pumpkin.

3. Dig a horizontal hole in each pumpkin. The closer the hole is to the bottom of the pumpkin, the better, so that it will not be seen when hung up.

4. Pass the No.20 steel wire through the hole of the first pumpkin. The pumpkin should be aimed at the ring wreath skeleton, and the steel wire should be screwed to let it enter the pumpkin hole, and it should be fixed near the ring wreath skeleton.

5. Repeat this step until all pumpkins enter the garland skeleton.

6. Spread dry peat between pumpkins. Fix it with more thread.

7. Tie a big bow tie at the top of the garland and let the long side hang under the garland. Bevel the ends to prevent wear.

8. There is a hook hanging on the wreath. Hang it in front of the door.

Method 2: orange and black garlands

1. Choose burlap or tulle as decoration. Both materials have great effects, and the process is a bit troublesome, but it is very interesting to do. Choose orange and black burlap or tulle.

A standard garland skeleton needs to use 90 cm of each fabric.

2. Cut the burlap or tulle into strips. Cut the cloth into10 *1.5cm. ..

Tie a bunch of black cloth on the garland. Then tie the orange cloth. Make sure there is enough space to highlight the color.

4. Continue to tie the cloth and replace it with orange and black. Don't be reluctant to use cloth strips; The more you use it, the better the effect.

Step 5 add decoration. Of course, it's up to you to decide what to add, but here are some suggestions: small pieces of wood with Halloween patterns can be bonded with ribbons or glue.

Orange and black bows.

Paper blocks with Halloween patterns are fixed with glue.

Orange and black fake flowers.

6. Stick a ring on it and hang a wreath.

7. all right. Hang it in front of the door.

Method 3: felt orange rose ring

1, choose orange felt. Use a big piece of paper, because you have to cut many rings from it. You can buy it from a handicraft shop. For the garland skeleton, nature is the best, such as the grape branch garland. See if the handicraft shop has a wreath skeleton made of natural branches. You can use cloth instead of felt. For instructions on making cloth roses, see How to make cloth roses.

Step 2 design a wreath. Knowing the design in advance can help you decide how many roses you need to make. You can tie the roses together or put them evenly on the garland. Your choice will depend on the skeleton of the wreath (the ugly skeleton of the wreath needs to be completely covered, and the beautiful one can be partially displayed). It also depends on how much time and energy you have to make felt roses. If you decide to put the felt roses evenly on the wreath, you may need to add some golden felt leaves. This can help the design maintain a "fluttering" feeling.

3. Roll the felt into a circle. It doesn't need to be perfect, just cut it casually, and you can use a circle as a prototype if you like. The size of the ring depends on the size of the roses you want to put on the wreath. It is suggested that it be about 10-25 cm, which is relatively easy to control.

4. Make a spiral. Cutting each felt ring into a spiral shape; Start from one side and build it into a spiral towards the center of the ring. When finished, the spiral should look like a snake. The more you cut, the better the effect.

5. Roll up and tie the felt spiral. This step can make the first rose. Roll in from the outer edge.

Dure that rolling proces, the bottom of the spiral is clamped; This can form the basis of roses.

When finished, the spiral looks like a rose. Now you need to tie a knot-turn the rose upside down and sew it at the bottom; Fix it with a few stitches, and then tie the knot. Subtract the extra lines.

6. The same is true for the rest of the roses. You need to make many roses to cover the wreath, so I suggest you have a rest before you start. Or ask a lot of people for help!

7. Fix the roses on the wreath skeleton. There are two methods; 1. Stick the roses on the garland with hot melt adhesive. You need to fix the roses in the right place until they stick together. It's a good idea to twist the bottom of the flower to give it a proper support.

2. sew on roses. Only when it is a natural garland can you do this. You need a little patience, because you need to thread the inside and outside of the garland and the base of the felt rose.

8. Fix a big bow at the top or bottom of the wreath. Simply tie a big and full bow around the wreath with orange ribbon and put it on the rose as part of the wreath.

9. Make a piece of cloth or belt into a circular hanger.

10, hanging on the wall or behind the glass door. If it rains, the felt won't hold. Don't hang it outside the door unless you know it won't rain.

Method 4: Candy corn garland

1, color the wreath black. Let it dry.

2. Apply Mod Podge glue (a manual glue) to the black garland. This enables it to cope with the weather outside or in front of the door.

3. When heating, stick a circle of corn candy on the outer edge of the wreath skeleton. Point the sugar corn in one direction, leaving no gaps at the seams.

4. Go back to the opposite direction and stick a circle of corn candy in the opposite direction. Stick a circle along the wreath. There will be a gap between the two rows; Don't worry, because black paint will be looming in the air.

5. repeat it. Change the direction of the candy corn rows until you are closer to the center of the wreath skeleton.

6. Apply Modpod glue to the whole wreath to seal it. Let it dry.

7. Stick a layer of decorations on the bottom or top of the garland. This step is optional, but extra textures are added. Ideally: BlackBowKnot.

Black craft or paper flower with a drill in the center.

A black cat, a wizard or a broom.

Anything you like.

8. Tie a rope or something that can be wound on the top of the wreath and hang it at the door. Double-sided rings help balance the suspension.

9. all right! Hang the wreath on the door.

Method 5: Pillow wreath

1. Choose a color to make pompoms. You can use black or orange, or a mixture of the two (there will be different pompoms on the garland).

2. Decide the size of the pompoms. Big pompoms are made into big garlands, and small pompoms are made into small ones. It depends on the size of your yard and your space requirements.

3. Make pompoms with the selected colors.

4. Tie the pompoms to the wreath skeleton. Fix the pompoms on branches or other garland skeletons with a hot glue gun. Let them connect closely, but don't squeeze into the fluff ball.

5. consider whether you need something extra. The garland can be hung like this, or you can choose to add some Halloween decorations, such as the silhouette of a wizard or a black cat, and a big bow.

6. Add a hook to the top of the wreath.

7. done. Hang it in front of the door or somewhere else. According to the form and practice of the garden, see if it is suitable for getting wet. Think about this when you hang it outside the door.