How to paste the zebra JJ 15 sticker?

1. Prepare a pair of scissors, a knife and a plastic card, and cut off as many blank waste edges as possible along the periphery of the pattern, so that it is easier to paste.

2. Tile the transfer film on the pattern to be pasted.

3. Scrape the patterned part repeatedly with the bank card to make the transfer film stick to the pattern.

4. Gently tear off the transfer film and pattern from the backing paper, and gently pick the non-stick part with a knife. Large-area patterns can be reversed. One hand tears the backing paper, and the other hand gently presses the pattern to separate the pattern from the backing paper.

5. Make a gesture on the wall to be pasted to determine the position to be pasted. It is difficult to remove the pattern after it is pasted on the wall, so fix the position with a corner of the transfer film without pattern before pasting, and then paste it slowly.

6. When pasting, one hand lifts the pattern and the other hand pushes it in one direction. After the baby sticks to the wall, use the bank card to scratch the pattern repeatedly from the center to the periphery, so that the baby can stick to the wall well. 7. Raise your hand gently