How to remove the watch chain if it is too long?

Precautions:

In order to avoid hurting the watch, we should pay attention to keeping our hands steady and controlling the direction of acupuncture to avoid scratching the bracelet or even the case. There needs to be a pad cloth on the table, and it is best to wrap the rice head with a surface film to prevent wear during slicing.

Steps:

1. Put on your watch, measure and estimate how many bracelets you need to cut. When there are two or more segments, they need to be cut from both sides of the chain belt respectively. For example, 3 knots = 2+ 1, and 4 knots =2+2. Pay attention to find the direction of the arrow on the inside of the bracelet, which is the direction to be struck.

2. Prepare a needle with appropriate size and aim it at the eye position.

3. Knock hard, pop up the pin, and cut off the chain belt to be intercepted.

4. After the chain belt is cut off, when installing the remaining watch chain, you need to knock with the reverse arrow. Note: the direction of the needle should also be reversed.

5. Prepare for reverse arrow attack.

6. This spiral watch joint is very convenient. All you need is a screwdriver, aim it at the empty place like a loose screw, and it will loosen after a twist.

In addition, there are complex top brands, which have their own unique watch chain structure and are not suitable for themselves. At this time, it is best to go to the brand to do it, and you can intercept them for free by showing your insurance card. If it really won't, I suggest you go to the counter or watch repair department to find a professional to get it.