How to wear the belt of Omega watch?

1. Fasten the belt from the outside of the buckle.

2. Pull out from the inside of the buckle.

3, buckle the buckle, you can.

As shown in the figure:

Second, the maintenance of mechanical watches:

1, the most common condition of mechanical watch maintenance is nothing more than water ingress and collision. Unless the mechanical watch is marked with waterproof function, water in the case must be avoided, because water will cause mechanical corrosion and be very destructive. Coupled with the inevitable external factors such as sweat and dust, it will definitely be tired, so a new waterproof ring must be replaced after one year, otherwise it will not have waterproof function.

2, in addition to waterproof, but also to prevent collision. Within the scope of economic ability, we might as well have two or three watches to replace them in daily life: wear a mechanical watch when doing static activities and a sports watch when doing dynamic activities, which will help to extend the service life of watches according to local conditions.

3. The mechanical watch is driven by mechanical gears and clockwork, and there will inevitably be friction when it rotates, so it needs to be lubricated for a long time to reduce the wear rate of parts. Otherwise, wait until something goes wrong before sending it for repair. Often, the problem is already very serious.

If you want to wear it every day, the best way to maintain it is to tighten the spring once every two weeks to ensure the normal and smooth operation of its gear. Turn the crown gently until you can feel a slight urgency.

5. It is recommended not to wear a mechanical watch when carrying out sports activities with continuous swing of arms, because the continuous swing of arms will destroy the movement of the watch. Make sure that the watch is always dry. To avoid rusting. This is the key to ensure that the watch has a good and lasting service life.

6. It is best to maintain the mechanical watch once a year to check whether there is improper use or water inflow. The climate is hot and humid, and the accumulation of sweat, rain and dirty air for many years has caused chronic erosion to the machinery, so "regular inspection" is very important, and then it needs to be thoroughly cleaned and maintained every three years.