Japanese World War II infantry weapons

During World War II, the individual equipment of the Japanese army was as follows:

Soldiers: 6.5mm 38 rifles, 30 bayonets, 94 armored kettles, front and rear magazines (120 bullets), helmets, etc.

Distribution: 94 pistol, telescope, saber, map bag, distribution kettle.

The Japanese army also has a special equipment-type 89 Grenade launcher, similar to a miniature mortar. Its structure is a closed cylinder with a steel pipe behind it for holding, and a base is hinged at the bottom of the steel pipe, which is similar to the seat plate of a mortar and is used to launch micro grenades, without a bracket and sight. It can be used to fill the gap between mortars and grenades, and its power is not much stronger than grenades. Compared with Grenade, it does not occupy the muzzle of rifle, but it has no advantage compared with Grenade launcher. As a single-soldier surface killing weapon, it is generally equipped with first-line troops.

The number of Japanese weapons adopts the service year as the model, which is called type, such as type 38 rifle and type 99 rifle.

The Japanese call rifles infantry spears or small spears, pistols fist spears, carbines riding lances, machine guns bayonets and swords, and fire protection caps anti-inflammatory devices.

There are three systems in Japan's weapons age. One is the year number of the emperor, which was adopted before 1926. March 8th rifle was adopted in Meiji 38 (1905).

Second, the Japanese era, Japan began in 660 BC as the Japanese era, so it was AD plus 660. Jiujiushi is the year of 2599 in Japan (Showa 14, 1939), so it is called Jiujiushi.

The March 8th rifle was designed by Colonel Nariaki Arisaka of Koishikawa Artillery Factory in Tokyo and completed by Major Kijiro Nambu in the south (he also designed the southern pistol, which was called the tortoise box by China people in the past, probably because its holster was nearly oval. In addition, he also designed the Type 2 machine gun, which was copied from Hotchkiss.

Later, due to the small firepower and insufficient lethality, it was decided to adopt the improved version of the 7.7mmx58 machine bomb that it started to use in 1932 in 1938, and adopted the boundless design. 1939 finalized mass production, it is a 99 rifle. Except for the different caliber, the gauge of the 99 rifle was changed from 2400 meters to 65433 meters. Two wings were added to assist air shooting and a monopod was installed. The strangest thing is that when all countries in the world began to use short-barreled rifles as official rifles, Japan still insisted on manufacturing long rifles with 3 1.5-inch barrels. At the same time, all countries began to bend the handle downward, and the style of 1999 still used the horizontal handle.

South-style 1 1 Shiki Kikanju, a light machine gun in the 11th year of South Japan, was adopted in the 11th year of Taisho (1922). Filled by magazine, the capacity is 6 rounds and 5 rounds of bridge clips, which can be filled with 6.5 rounds of standard 38 rifle bullets or reduced version of light machine gun bullets. Before the bullet enters the chamber, an oil brush is attached to the funnel to lubricate the bullet, otherwise it will lead to the failure of shell ejection.

Because the butt of the gun bends to one side like a gooseneck, it is commonly known as the crooked light machine gun. From War of Resistance against Japanese Aggression to the Korean War, it was widely used by guerrillas and the People's Liberation Army behind enemy lines in China. In theory, guns can use the same ammunition as infantry, which is very convenient. The auxiliary shooter can throw the bridge clip used by the infantry into the bucket to shoot. In fact, in actual operation, under continuous shooting, the barrel will overheat quickly, and the barrel cannot be changed, so the shooting must be interrupted. The parts of the hopper are very complicated and often break down. So although it was a good idea for the first time, it was never used again these days.

Many critics believe that the development of the Type 96 machine gun was improved after the Japanese saw the Czech type in China. With its reputation in the Czech Republic, Japan should not have to go this way. What impressed it was the lethality of the 7.92 bullet. Moreover, the operation mode of Type 96 is completely different from that of Czech type.

Although the Type 96 light machine gun was finalized in 1936, it was not until the Pearl Harbor incident that the troops invading Malaysia were fully equipped that Japan had the ability to distribute a large number of troops. Japanese ground and air forces (Military Intelligence Bureau, Washington, D.C., Information BulletinNo. 14) pointed out in May 1942: "The British army recently encountered a new type of Japanese weapon in Malaysia"; The picture shows a British soldier carrying a Type 96 light machine gun and two Type 96 close-ups. The 25th Army, which recorded Zhixing at the foot of Tiger Mountain in Malay, was the first army fully equipped with Type 96 light machine gun.

The July 7th Incident produced by 1996 * * and the joint venture film Nanjing 1937 produced by 1995, in which the Japanese army had three different kinds of 7.7mm bullets in 1939, and Japan * * *. Some of them are used on Lewis machine guns of the navy and naval air force.

The Czech Republic delivered 1000 ZB-37 heavy machine guns to China in 1937; The gun looks a bit like the Japanese Type 92 heavy machine gun, but it uses a bullet chain instead of a bullet plate, and the locking method is similar to the ZB-26 series. In recent years, in China's anti-Japanese films, the Japanese have mostly replaced the 92 style.

The first self-designed rifle in Japan after World War II was the Type 64, 7.62mmX5 1 rifle, which was developed by Howa Industries. It weighs 4.4 kilograms and is 0.99 meters long. Its working principle is similar to that of SKS Tokarev SVT-36/40 and FN49/ FAL. The Japanese were surprised. Use lightening bullets to match the sensitivity of Japanese soldiers to recoil. This is also a strange thing. I don't think 7.62mmX5 1 is as powerful as 7.7mmX54. If you want to use normal NATO ammunition, you should adjust the gas button.

Fenghe Industry later developed the 89-type 5.56mmX45 rifle, distributed at 1989, weighing 3.5 kg and 0.92 m long. It uses M 16 magazine, and has the functions of single engine, three engines and full automation. 1962 the first machine gun was finalized and mass-produced. Developed by Nitto Metal Industry Co., Ltd. (now Sumitomo Heavy Industries), with a weight of 10.7kg and a firing rate of 659 rounds per minute. Pistol was authorized by Sig to produce P220 in the1980s, but it was 9mm. The magazine is single-row and can only hold 9 bullets. (There are two possibilities here, one is because P220 was originally produced. 45 ACP design does not change the handle, so it does not change the size of the magazine. This is a bit lazy. Another possibility is that the palms of orientals are smaller and the handles of single-row magazines are easier to master. If so, it is commendable. )

Japan's March 8 6.5 mm rifle is a military model developed by Japan on the basis of its 30-year 6.5 mm rifle.

Rifle. Because it was the thirty-eighth year of Meiji (AD 1905), it was named "March 8th Style". 38 rifles and 30 years

The most remarkable difference in appearance between these two rifles is that the former adds a "∩"-shaped dust cover above the shell, which

The dust cover can slide back and forth with the bolt. When the bolt is closed, this big dust cover completely covers the whole shell.

It can effectively prevent dust from entering the casing. As a result, the Type 38 rifle got a resounding name-"38 Big Cover"

"。 Indeed, in China's urban and rural areas, streets and lanes, everyone does not know "Japanese, cannon"! Sanba

Japanese fascist rifle is the most important and basic individual weapon of Japanese fascist Lu Haijun in the Second World War, and it is also the most equipped.

The largest and longest equipped individual weapon was not used until Japan was defeated and the end of World War II.

40 years.

Characteristics of "March 8th Big Cover"

"Sanba Gai" gun consists of seven parts: barrel, sight, bolt, shell, magazine, stock and bayonet. Guns are everything.

Face inherited and realized the purpose of "reliability, convenience and simplicity" of the Japanese military, and fully concentrated and played the role of Japanese mechanics at that time.

The advanced technological achievements of industry can be said to be a processed product since World War I and during World War II.

A rifle with excellent quality and excellent combat performance. China People's Liberation Army East China Military Region and the Third Field Army believe that this

The gun has the following characteristics: (1) The steel of the gun is good and durable. If properly kept and wiped, 10000 bullets can be fired;

(2) The aiming baseline is long, and even if there is a slight aiming error when shooting, the warhead deviation is small; (3) Due to the charge of the bullet

Small, the muzzle velocity is small, so the lethality is small. However, the vibration of the gun is small when shooting, so the hit is more accurate; (4) the barrel is opposite

Long, so the range is far; (5) Provide dustproof devices to prevent dust from invading the shell; (6) Full gun length, although not much to carry.

Convenient, but suitable for hand-to-hand combat.

The Structure of "March 8th Big Cover"

With a total length of 1275mm, "March 8th Daguai" can be said to be the longest rifle among the rifles used by the major participating countries during World War II.

Mosin used by the Soviet Red Army at that time? Nagan1891/307.62mm rifle is 43mm long. From the appearance, all guns appear.

Very slim and neat, so it is more convenient to operate the gun, unlike some rifles, which are "fragmented" in appearance. "three

The barrel length of the "Eight Covers" is 769mm, which is also the longest barrel in all kinds of main battle rifles during World War II. There are four right-handed chambers in the barrel.

Line, in order to pursue shooting accuracy, the rifling lead was determined to be 200mm, which was the smallest among all kinds of rifles at that time. Therefore, "

The warhead launched by Sanba cover has high rotating speed, good flight stability and relatively small hit error. Because of the initial velocity of the warhead

It is 762 m/s, although it is also the smallest of all kinds of rifles at that time, but after the warhead hits the target, it still has enough penetration and

It's not easy to roll. It is more accurate to say "March 8th Big Cover", which is naturally directly related to aiming. Quasi-star shape of "March 8 big cover"

Shaped like "∧", the dovetail groove can be adjusted horizontally with the quasi-constellation. Nothing special.

The cover of March 8 has no visual wings, but the post-production has visual wings. The scale of "March 8th Big Cover" and the general steps.

The plate arc gauge of the gun is different. It is an upright "frame" gauge with three notches (table

There are two notches on the ruler frame plate, and there are 1 notches on the cursor. Accordingly, there are three usages. Usually carrying rifles or

When the target is within 300m, the ruler frame is used in the state of being pulled forward, and the notch on the ruler frame plate corresponds to the door.

The shooting distance is 300 m; When the target is over 400 meters, set the ruler frame backward and move the cursor upward, and use the ruler frame board.

Another gap in the door, at this time, the shooting distance corresponding to this gap is 400 m; When the target is above 500 meters, proceed.

With the ruler frame still, move the cursor down to this position and use the third notch on the cursor to illuminate the door. At this time, this gap disappeared.

The shooting distance corresponding to the oral photo door is 500 m; When the shooting distance is greater than 500m, move the cursor up one by one to make the gap on the cursor match the door.

Target distance correspondence. The scale range of "March 8th Cover" is 2400m m .. In the post-production of "March 8th Cover", some of them were adopted.

The purpose of illuminating the door with three holes is to try to offset the aiming error by illuminating the door with holes, thus simplifying the aiming training of recruits.

Cheng. However, practice has proved that the door on the "March 8 cover" is too far away from the user's eyes to aim at.

Especially at night. The position form of the relationship between sight and scale, such as "March 8 big cover" displayed by the door.

But it is not as convenient to use as the notched door. The move of "March 8th Big Cover" to change the hole is self-defeating. Operational practice has proved that this step

The maximum distance of gun combat use density is usually within 200m, but the real distance to reach the peak of use density is1000 m left.

That's right. At this time, you can also take advantage of a little-known advantage of the mullion gauge, that is, when the shooting distance is about 50m to 100m.

You can erect the ruler frame, put the target and sight in the vertical frame at the same time, and shoot quickly, if you have some training.

Shooting is not a problem, shooter.

Compared with the "Golden Hook Rifle", the biggest change of the "March 8th Cover" is the bolt. In the forest of world rifles, there is no inheritance.

At that time, the bolt structures prevailing in all countries were unique, including the "March 8th Cover" bolts. There are many forests all over the world.

All kinds of rifles that use rotary locking rear-pull rifles can usually be divided into three categories. one

, that is, the bolt structure represented by German M 1888 Mao Se rifle; Second, is it based on Mosin in Russia? Nagan 189 1 rifle is the representative.

Bolt structure; The third is the bolt structure represented by the Japanese "March 8th Cover". In these three typical bolt machines, the knot

The bolt with the simplest structure, the simplest disassembly and the least number of parts is the "March 8th Cover", which only decomposes the bolt body.

Shell hook, tail, striker and striker spring. And the other two types of bolt parts, at least more than six. The above three categories

The nose of the bolt is similar, but the difference is mainly in the tail. The "three-eight cover" bolt has no two tails.

Europe's "big brother" is so complicated, the "golden hook" in the predecessor's way has been removed, and the tail (safety machine) has been changed to one.

The knurled flat tube will not hook clothes and try on clothes, which is convenient for the shooter to operate, especially in cold weather.

Glove operation (press the tail forward and rotate it to the right for positioning, which is in a safe state; Press your tail forward and turn left.

Go to the position, that is, the state to be played). In addition, the handle of the wire drawing machine on the bolt body of the bolt adopts a unique ellipsoid to replace the transmission device.

Uniform spheres are also designed to improve operability, especially when wearing large gloves in cold conditions.

There is a longitudinal groove on the upper and right side of the shell of the March 8th cover, which is used to install and adjust its unique "big cover" (

Dust cover). At the rear end of the dust cover, there is a square hole for the handle of the wire drawing machine to pass through. When the bolt is pulled open, the dust cover opens.

The bolt machine slides backwards together, so that the shooter can use the loading/unloading port of the boot box and the guide groove of the magazine to load the magazine with bullets.

Complete the actions of shell extraction and shell throwing; When the bolt is pushed, the dust cover slides forward together with the bolt until the shell is completely closed.

The shell throwing port and the shell guide groove completely prevent the sediment and dust from entering the rifle core. This point of the world.

All rifles can be said to be unique, and the resulting tactical and technical benefits are unparalleled in the world. Forget it.

From our perspective today, it is also the finishing touch.

Explore the "March 8th Big Cover"

It should be said that the structure of March 8 Cover is very simple, and its consideration of operational performance and battlefield service performance,

But very thoughtful. We look at it from the following aspects.

Let's start with the "March 8 cover" secret room. Generally speaking, there is little difference between other rifles of the same type. However, the secret room of "March 8th Big Cover"

Right above the drill bit, there are two air holes, which are of little use to ordinary people, but they are not. The two vent holes may

In order to form a gas pulling force with the muzzle at the moment when the bolt is unlocked, which is similar to the function of the chimney of modern tank guns, this is undoubtedly

Conducive to the cooling of the chamber. In addition, the magazine "San Ba Da Guai" is similar to "Mao Se" in general, but worse than "Mao".

"Sir, worse than others, one more bullet point, that is, when the last shell was thrown out of the gun, the nose of the bolt was bounced.

The magazine support plate is blocked, and it is impossible to push the bolt forward, so as to inform the shooter that "it is time to load the bullet!" This is similar to modern firearms.

The function of "hanging up empty warehouse" is really important in actual combat, especially in urgent and hasty battles! Calling it indispensable is not

Too many. The bamboo shoots on the bottom cover of Mao Se magazine are deeply hidden in the bamboo shoot holes on the bottom cover, so it is difficult to take them out without corresponding tools.

In battle, it is not easy to take out bullets or dirty things from the magazine. There is also the bottom cover knot of the magazine "March 8 big cover"

Structurally, it is almost the same as the bottom cover of Mao Se magazine, except that the bamboo shoots are stuck in the front edge of the trigger holder and pressed forward with the thumb, that is,

The magazine bottom cover can be conveniently disassembled, so that wiping maintenance and quick ejection have great convenience and safety. Watch "March 8th Cover"

"Stock. For a rifle, the butt is not small in terms of ergonomics or production cost.

Could be a problem. From the point of view of ergonomics, the butt stock of "Sanba Gai" is the same in longitudinal dimension, neck stock and thickness.

As well as the design of the bottom plate and the position of the gun belt ring.

Suitable for the average height and figure of adult men in Japan (including Asia), including using guns, guns, guns and guns.

And natural feelings like thorns are more comfortable. Of course, many excellent rifles in the world are not inferior in this respect. From dealing with students

In production, there are two similarities between the stock of traditional rifles and the lower guard wood. One is that most of them are an integral part; The second is big.

It is made of a whole piece of wood. Although the butt stock and the lower guard wood of "March 8th Cover" are also a whole, they are composed of two parts.

Made of wood. Wherein, the upper gunstock and the lower gunstock are made of a wooden strip, and the lower gunstock

Made of a small piece of triangular wood. This alone can save a lot of wood. This is for wood resources like Japan.

The benefits of a country that lacks resources and needs to manufacture a large number of weapons to meet the needs of the fascist war of aggression can be imagined. Let's take another look.

Look at the bayonet with the "38 big cover". As we all know, with the development of Yamato budo, Japanese sword-making technology and craft.

, very distinctive. When Japanese militarism improves its weapons of aggression, it will naturally pour all its building technology.

Yes Japanese militaristic bayonet has two remarkable characteristics: first, it has achieved absolute standardization, and its standard bayonet is single-edged.

Oblique-front bayonet is 500mm long, in which the blade length is 400mm, and the total mass is 0.5kg, including "March 8th Cover".

There are Japanese rifles, type 96 light machine guns and bayonet interfaces; Second, steel "lives" well. Under the same conditions.

Under the condition of opening military tanks, the comparative test results of rifle bayonets in major countries during World War II show that Japan's steps

The bayonet with the gun has the best hardness, and it is the only bayonet that does not roll the blade and does not collapse. At this point, I can't help but feel a strong uneasiness.

I have a strong feeling: How hard it is for the people of China to fight against Japanese fascism! War of Resistance against Japanese Aggression's victory was hard-won.

Yi!

"March 8th Big Cover" Family

According to the present statement, "March 8th Big Cover" is actually a gun clan. While designing 38 rifles, three models were also designed.

Eight-type 6.5mm carbine. Except that the barrel of the gun is 306mm shorter than the rifle, the belt ring is located on the left side of the gun body, and the upper guard wood is attached to the headband.

Covered directly outside the ruler base, other mechanisms are exactly the same as rifles. On the upper surface of the bore of the 38 carbine, it is also like

The rifle is engraved with Japanese imperial flowers and the inscription "March 8".

In the forty-fourth year of Meiji (A.D. 19 1 1), a 6.5mm carbine with a folding bayonet was derived, and its year was defined as

"Four-four style". The mechanical characteristics of the 44 carbine are basically the same as those of the 38 carbine, except that it is added directly below the gun body.

The bayonet seat is connected with the headband, and the upper surface of the chamber body is engraved with Japanese imperial flowers and "44"

"Inscription type.

Daily decomposition and combination of "March 8 big cover"

Decomposition:

1. Hold the gun in your left hand, and turn the handle in your right hand to the left to pull the gun back. Turn the gun to the left with your left thumb to stop the bamboo shoots, and continue with your right hand.

Pull back the bolt until the bolt and dust cover are removed from the bolt, and then remove the dust cover from the bolt;

2. Hold the gun body with your left hand, push the tail of the press forward with your right hand, rotate the tail clockwise by 90 degrees, and then slowly loosen it and take it off.

, pour out the needle and needle spring;

3. Push the magazine cover inside the front edge of the trigger holder forward with the thumb of the right hand, and remove the magazine bottom cover and magazine support plate (spring) with the left hand.

.

(2) Combination: In the reverse order of decomposition.

Note: (1) The decomposition and combination methods of daily step and carbene mentioned in this paper are the same as above. (2) Before installing the bolt into the shell, you should

Insert the front end of the dust cover into the dust cover guide groove on the chassis, and then push the bolt machine forward; When the ejector plate blocks the bolt, use your left hand.

Press your thumb down on the ejector plate, and then continue to push the bolt machine to the front position.

In the 12th year of Hirohito (AD 1937), a 6.5mm sniper rifle was derived from March 8th Cover.

It was named' 97' sniper rifle because it was in SHEN WOO in 2597 (the inscription on the surface of the gun bore was' 97').

1997 sniper rifle is difficult to distinguish from "March 8th Cover" at first glance. Look carefully, 1997 sniper rifle has a sight seat.

Can be equipped with a sight; The second hoop of the gun has a steel wire bracket, which is folded forward under the gun body at ordinary times and unfolded downward when necessary.

, as a tripod when shooting. In fact, how useful is this steel tripod? Can you stabilize the gun rack? Very doubtful.

! However, most Japanese guns have a rule, that is, at a certain time, there will always be "evil, barbaric and clumsy" things.

Come on, or you won't call it a Japanese gun.

The caliber of "March 8th Big Cover" has always been a controversial issue for the Japanese army. As early as July 9th in Emperor Taishō.

In A.D. 1920, the weapon research policy of the Technical Headquarters of the Japanese Army required rifles to adopt 7.7mm caliber, but it was not until Showa Day.

In June of the 13th year of Emperor Huang, that is, A.D. 1938, 7.7mm caliber bullets were used in rifles (compared with 99 heavy machine guns).

The purpose of the test is to make the rifle have the same power as the heavy machine gun, so as to solve the 6.5 mm step, the machine bullet is in

The problem of insufficient strength on the battlefield in China. Three or eight steps, carbine and four rounds with 7.7mm caliber were used in the experiment.

Finally, it is considered that the muzzle kinetic energy and recoil force are too large after the two types of carbine are changed to large caliber. And "March 8 big cover"

It's not a problem to change the caliber. So in the fourteenth year of Hirohito (AD 1939), on the basis of the "March 8th Monster"

A new 7.7mm rifle came out. Because it was SHEN WOO in 2599, it was called "Jiujiu Style". Jiujiushi

The rifle is basically the "March 8 big cover" made in the later period. In addition to increasing the caliber, the "97 type" was added to the second hoop.

The sniper rifle is also a steel tripod, and folding handles are added on both sides of the mullion gauge to shoot air targets.

Adopt front measuring rod and door opening lighting. After July of the fifteenth year of Showa, the 99 7.7mm rifle was identified as a Japanese standard weapon.

Device, "March 8 big cover" will be discontinued.

Because the 99-type 7.7mm rifle with the shape of "38 cover" has better muzzle kinetic energy and recoil than "38 cover".

The increase was obviously not suitable for short Japanese soldiers, so a model with a length of "38 big cover" and two models were subsequently introduced.

The main features of the 7.7mm short rifle carbine room in 1999 are the upper guard wood hoop from head to toe and the second hoop.

There is no steel tripod, and the strap ring is on the left side of the gun body. The top of the tomb is also engraved with Japanese imperial flowers and the words "Jiujiu Stone".

In addition, in order to meet the operational needs of airborne troops, a 7.7 gun which can be divided into two parts from the barrel socket is also produced.

Mm short rifle, which the Japanese military named "Type II" rifle. 99 7.7mm rifle series officially put into production and equipment day

When I was in the army, it was also the time when the Japanese invaders "the sun in the west is about to set." Whether in China or in the southeast.

As a matter of fact, the battlefields in Asia and even the Pacific have not become a climate, let alone the failure to save the Japanese aggressors. Later, 99-type production

The level and processing quality have gone from bad to worse, far less than the "March 8th Big Cover".

The cover of March 8th is in China.

March 8th Cover 1907 started production, and 1940 stopped production, with a cumulative production of more than 3 million copies. China's old system

The government once bought a batch from Japan, and later the arsenals in Liaoning and Taiyuan also copied them one after another. In War of Resistance against Japanese Aggression, even

After the victory of the Anti-Japanese War, China soldiers and civilians seized a large number of "March 8th Cover". It's a pity to abandon it because of insufficient ammunition. At that time, China.

The People First Party authorities once appointed the 60th Arsenal of the Ministry of Military Affairs to change the 6.5mm caliber "March 8th Cover" to 7.92mm caliber in order to be in line with the country.

The 7.92mm caliber ammunition system of the Kuomintang army is consistent. Where the caliber of the "March 8th Cover" has changed, the top of the gun bore is engraved with "change".

The words "79". At the beginning of the victory of the Anti-Japanese War, the 90th Arsenal of Shenyang Kuomintang once copied the 1997 rifle, but the caliber was changed to 7.9.

2mm, and remove the mirror base at the same time. Because this product is not in the standard, it is called "temporary rifle" and it is in the box.

The top is engraved with the words "Pro 79".

In China's vast anti-Japanese battlefield, the number of 7.7mm rifles or short rifles seized in 1999 is far less than that of "March 8th Cover".

The main reason is that the 1999 7.7mm rifle or short rifle is only circulated in the hands of the Kwantung Army in northeast China, and most of them are.

It was used to equip the Japanese army to fight in the Pacific region, so there are many Jiujiu styles in Europe and America now, all of which are post-war actions.

From the trophy collection. In China, the "March 8th Cover" has been used by the Japanese army to defeat and surrender, while our army has been used by Chinese mainland.

After the liberation of the whole territory, a considerable number of "March 8th Big Gai" participated in the War to Resist US Aggression and Aid Korea. Since then, the vast number of militia in China have been

Used in the mid-1970' s, the "March 8th Big Cover" was taken from the powerful enemy and used by us to fight against the powerful enemy.

Li Pin has been used in the hands of China military and civilians for a long time, and its distribution area is wide, which is really rare in history. along with

As for the older generation of soldiers, there are always endless stories about the "March 8 big cover"; Every time, it ends with "March 8 big cover"

",is so fondle admiringly, holding a gun a recruit a type and always so skilled. This is the people of China and their taxi.

Soldiers! History is like this: the army and the people are the foundation of victory!

Southern fourteen pistol

Working mode: semi-automatic

Diameter: 8 mm

Weight: 0.9 1 kg

Magazine: 8 rounds

Introduction: The 14 pistol in southern Japan is an improved version of the original southern pistol. It is made by Nagoya Arsenal. In 1925, it was listed as the standard weapon of the Japanese army, and it was equipped with a general officer during World War II. Guns are commonly known as "turtle boxes".

Riding a gun in' 44

Operation mode: manual bolt, 4 right-handed rifling.

Size: length 868 mm, barrel length 487 mm.

Diameter: 6.5 mm

Weight: 3.3 kg

Magazine: 5 rounds

Introduction: carbine is a shortened version of rifle, with the same basic design. The initial velocity is 732m/s, and the sight has a gauge of 2000m. From 1905 to World War II. There is a dust cover above the bolt.

Jiujiu rifle

Working mode: manual bolt machine

Diameter: 0.352 inch (9 mm)

Introduction: The shorter model of this rifle was adopted by the Japanese military before World War II, while the standard type was longer than the former152 mm. Note that the practical value of the wire monopod under the front section of the gun body is doubtful. Originally, the design was improved compared with the March 8 model, but due to the lack of resources in Japan in the late war, many parts had to use substitutes, which greatly reduced their efficiency.

Type 92 heavy machine gun

Working mode: automatic air cooling.

Diameter: 7.7 mm

Total weight: 62.5 kg (including tripod)

Magazine: 25/30 rounds of ammunition board for ammunition replenishment.

Firing rate: 650-700 rounds

Brief introduction: yellow machine 2592 stereotypes, air guide automatic principle.

Eleven-year light machine gun (slanting gun)

Working mode: automatic air cooling.

Size: 1. 1 m, total weight 10.2 kg.

Diameter: 6.5 mm