Method for making dining table and chair cover Method for making tablecloth, cushion and chair cover

Lead: Nowadays, many families will put a dining table dedicated to eating in the kitchen, and match the dining table with several chairs for daily eating. But it is easy to spill some food when eating, which leads to the mess of the dining table and dining chair. At this time, it is an excellent solution to put a table cover and a chair cover on the dining table and dining chair, which not only solves the problem of food spillage, but also has low cost. The following is a detailed introduction to the making method of dining table and chair cover, as well as the making method of Bian Xiao's cushion and back cover.

Table cloth making

Actual size of the table: 135cm*80cm.

1. Cutting: one piece of grid cloth:165cm *110cm, one piece of cloth, width 13cm.

Pure cloth: a piece of cloth with a width of 13cm.

2. Burr the long grid cloth.

3. Align the long plain cloth with the long grid cloth for sewing without pleating.

4. Align the sewn cloth with the rectangular plaid cloth for pleating, with one pleat 12 stitch.

5. Sew the hem part to lock the edge.

Cushion cover making

Seat size: 40cm*40cm

1. Cutting: grid cloth: 45cm*45cm four, 45cm*50cm four, 5cm*30cm sixteen.

Lining: 45cm*45cm four, 45cm*50cm four.

Pure cloth: four strips, width 15cm.

2. Sew the back of the grid cloth and the lining, press the thread, and sew into four large grids and four small grids.

3. Cut the big grid, install a 40cm long zipper, and then cut it into the size of the small grid.

4. Deburr one side of the pure cloth strip.

5. Sew a piece of 5cm*30cm mesh cloth into a bandage.

6. Sew the strap on the front of two pieces of grid cloth, and lock the edge after sewing.

7. Pleat the pure cloth, sew it with zipper, and sew 6 stitches in one pleat.

8. Sew lace cloth with 45cm*45cm cloth.

9. Sew the stitched three sides.

10. Open the zipper and insert the cushion core in turn.

Manufacture of chair back cover

Seat back size: 39cm*52cm

1. Cutting: grid cloth: eight strips, width 10cm.

19cm*54cm four, 16cm*40cm four and 9cm* 1 1cm four.

Pure cloth: eight strips, width 10cm, and four strips, width 75cm*45cm.

Lining: 75cm*45cm set.

2. Sew 75cm*45cm pure cloth belt lining.

3. Burr the strip pure cloth.

4. Sew the long plaid cloth together with the long plain cloth without pleating.

5. Pleat and sew the sewn cloth and pure cloth, and lock the edges.

6. Sew the two sides of the pure cloth and lock the edges.

7. Make other squares into butterflies and sew them on pure cloth.

Conclusion: Through the above introduction, I believe everyone has a certain understanding of the manufacturing method of dining table and chair cover, as well as the manufacturing method of cushion and supporting. Every family will have a set of dining table and chairs. Installing a protective cover on the dining table and chairs is a very good way to prevent the tables and chairs from getting dirty. Not only the cost is low, but also the effect is obvious. You can even make some dining tables and chair covers yourself with some discarded clothes at home. I hope the above introduction in Bian Xiao can help you understand how to make dining tables and chair covers, and how to make cushions and chair covers.