How to take pictures indoors

To take good indoor photos, you need to use different skills according to the intensity of indoor light, the change of scene and the different shooting effects you want. Photosensitive elements and ISO In digital cameras, photosensitive elements replace films, and the sensitivity of photosensitive elements to light can be adjusted by the ISO value of the camera. The higher the ISO value, the more sensitive the photosensitive element is to light, which is helpful for taking pictures in low light scenes. The picture shows the Ladd market in Hyderabad, Pakistan. Flash flash, as long as the subject is within the effective range of flash, you can take photos in the dark without increasing the ISO ratio of the camera or using a tripod. However, when you take pictures with the built-in flash of the camera or the flash installed on the camera's hot shoes, the pictures you take are often very flat, and there are obvious shadows behind the subject. This photo shows two people going to a Halloween party in West Hollywood. Reflective flash uses the technology of reflective flash, and the shooting effect is more ideal. You need a flash that can adjust the flash angle, or a flash away from the camera. When flashing, aim at the ceiling, wall or reflector, so that the light can be dispersed and softened and reflected to the subject. The picture shows a band playing with a reflective flash in Reykjavik, Iceland. Incandescent lamp This photo of a nun lighting a candle was taken at Shimen Temple in Zagreb, Croatia. The light source used is incandescent bulbs or candles. If you can use the existing light, you can take pictures without using a flash. In some cases, such as behind glass, in churches or museums, at religious ceremonies, or when you don't want to attract attention, it is not suitable to use flash. The incandescent light of tripod is usually very weak, but if you use tripod or other equipment to fix the camera, you can use the ISO setting you want to shoot in weak light to get the ideal depth of field. This photo shows the Easter ceremony of the Catholic Church in Saint Lucia. Increase ISO value If shooting with automatic white balance, check whether the color recorded by the camera is satisfactory to you. The function of white balance is to adjust the color so that white can be recorded as white under any light conditions. In order to restore the color more accurately, you can use settings such as iodine tungsten lamp or fluorescent lamp. Taking pictures in RAW format can make more room for later adjustment of white balance with software. This photo is of Emmanuel Monastery in Milan, Italy.