How to polish nanmu gold wire?

Gold nanmu polishing, first, Jin Sinan polishing Many people only know how to grind but don't know how to wipe. While grinding, they fill in wood powder, of course, it will not shine, so it is important to keep it clean at all times. Be sure to wear gloves and rub them a few times, including sandpaper.

2. Sandpaper should be sanded from 80, 120, 260, 320, 600, 800, 1000, 1200, 2000 and 3000 mesh respectively. If you can't buy some sandpaper, you should polish it several times and try not to jump every once in a while.

Third, the initial grinding must be in place, otherwise the glass left by the grinding marks will not appear, and the subsequent plates will not appear.

Fourth, after grinding from 80 to 2000, wipe it with a wet cloth, so that it will be fluffy when it is dry, and then grind it from 2000 to 3000, and you will know the trick.

5. finally, use cotton gloves or stockings to grind?

When you gradually grind the baby to 2000, many people think it's done, but after a while, it's found that the luster is gone, and it's not as smooth as when it was just polished, so this has become Jin Sinan's so-called shortcomings and deficiencies! In fact, this is the performance of wood surface fuzz and pinhole blocked by wood powder.

When you rinse the polished surface with water or wipe it with a wet cloth, you will find that the surface becomes rough and hairy again. After drying, use more than 2000 sandpaper to grind hard, and there will be surprises while grinding. When it is polished, you will find that the texture of the glass is fully reflected. With the intensity of heating and wiping with paper towels, the wood becomes transparent and the gold wire shines. Jin Sinan, which everyone likes, is your baby. When you gradually grind your baby to 2000, many people think it's done. But after a period of time, it was found that the luster was gone, and it was no longer as smooth as when it was just polished, so this became what Jin Sinan called faults and shortcomings! In fact, this is the performance of wood surface fuzz and pinhole blocked by wood powder.

When you rinse the polished surface with water or wipe it with a wet cloth, you will find that the surface becomes rough and hairy again. After drying, use more than 2000 sandpaper to grind hard, and there will be surprises while grinding. When it is polished, you will find that the texture of the glass is fully reflected. With the intensity of heating and wiping with paper towels, the wood becomes transparent and the gold wire shines. Jin Sinan who loves everyone is your baby.