How to disassemble the Angkor Sela cigarette lighter?

The disassembly and assembly method of Angkor Sela cigarette lighter is as follows:

1. Screw-in housing: The screw-in housing is installed behind the cigarette lighter seat of some cars, which can be unscrewed in the opposite direction and then installed in the positive direction;

2, screw removal: some cars are fixed with screws behind the cigarette lighter seat, as long as you remove the screw with a wrench, you can take it off. Similarly, screw the screws first, and then install them;

3. Dismantle the panel: Dismantle the panel of the gear lever. The panel of the gear lever is a plastic hook, and the whole panel can be removed by simply breaking one side by hand or tilting it with a screwdriver;

4. Dismantle panel screws: When disassembling the panel of the gear lever, the panel door of the cigarette lighter will open automatically when pressed, and then you will see two black screws, so use M4 Allen wrench to remove them;

5. Dismantle the panel box: Pull out the panel plastic box of the cigarette lighter directly by hand. When it is about 10 cm, pull out the connecting wire first, and only in this way can the whole box be pulled out;

6. Operate the inner ring and the outer ring: the cigarette lighter includes the outer ring and the inner ring. When in use, the inner ring is pressed in, and when it reaches a certain temperature, the inner ring will automatically bounce back to its original position. At this time, you can pull out the outer ring by hand.

Million car purchase subsidy