How to polish the clothing shoot? How to match the light to have good sharpness and clear air sense?

The background must be white PP paper. Turn on two 400-watt lights to illuminate the white background from both sides. The background light is stronger than the main light intensity, otherwise the white background is not transparent enough.

When hanging clothes, stay away from the white background when shooting, and a distance of about one meter two to one meter five is enough. Too close to the background is easy to leak light, too far away, the contrast between clothes and background is too big, so it is not easy to shoot.

The main light was shot with a 400-watt lamp in an octagonal soft box. Turn on the light a little more. The position of the main lamp should be slightly in the center of the clothes, and the position of the lamp should be higher than that of the clothes, that is, the position of the lamp center is facing the neckline of the clothes. If possible, it is best to add white foam boards on both sides of the main light (as close as possible to clothes), because when shooting high-profile pictures such as clothes, it is often not by lighting to create a large area of soft light, but more by reflecting boards.

When the camera ISO is fixed at 200, the noise will increase under the LO option, so it is not used. The shutter speed is set to125/1s. The exposure is controlled by the aperture, which is fixed at F9.5 first. When shooting, take a photo first to see if the background is pure white, and remember the aperture value. If the background is pure white and the clothes are slightly under-exploded, you can increase the main light output value by another quarter (after adjusting the light output value, you must flash once before shooting). If the background is not white enough and the clothes are obviously under-exploded, you can open the aperture by another quarter to F8. As long as the aperture value is set to a pure white background, the exposure of clothes can be controlled by the output and distance of the main lamp. In addition, it is best to use wireless flash equipment when flashing, not the built-in flash, otherwise the photos will have some ugly shadows.

In fact, it should be noted that the aperture of the background light should be determined first, and the shutter speed and sensitivity should not be moved when setting. For example, if the background exposure is just under the aperture of F9.5, the exposure of clothes will be weaker than the background light by one step, that is, F 1 1 (the aperture values of the background light and the main light can be measured separately with a flash exposure meter). Similarly, if the background light F 1 1 is normally exposed, the main light is F 13, and so on.