Passat combustion engine oil

Passat burning engine oil is a common phenomenon, so there is no need to panic, but if it burns engine oil, it must be solved as soon as possible. In order to solve the problem of burning oil, we must know what the reason is.

In fact, the root cause of burning engine oil lies in the poor quality of domestic fuel and engine oil. Everyone should know the difference between fuel and oil, but the difference between oil and oil is a bit confusing. European engine oil standards are much higher than those in China. In Europe, there must be 22% additives in engine oil, and their contents are as follows: typical multi-grade engine oil-78% base oil, 10% viscosity improver, 3% detergent, 5% dispersant, 1% antiwear agent and 3% other components; However, the content of domestic engine oil additives does not exceed 15%, or even less. The poor quality of engine oil can not only clean the dust in the air inhaled by the engine when it is working and the carbon deposit formed after combustion, but also the colloid formed by its own oxidation will combine with other impurities, which will lead to more carbon deposit. These carbon deposits are deposited in the piston, which affects the outward elastic tension of the piston ring and leads to the decrease of cylinder pressure. If it is deposited in the engine, it will cause poor lubrication, increased wear, increased fuel consumption and decreased power, resulting in engine oil combustion.

Burning engine oil is not a terminal disease, it can be completely prevented, and the cost of prevention is also the lowest. The prevention method is also very simple. Firstly, add Martibe and Marti F to gasoline regularly to keep the fuel system clean, inhibit carbon deposition and improve combustion efficiency. Second, Marty M is added to the engine oil to improve the performance of the engine oil, such as cleaning, lubrication, protection, temperature control and other functions, reduce engine dirt and avoid wear, thus solving the problem of poor fuel and engine oil quality, and never having to worry about burning engine oil again. The key to burning engine oil is to learn to prevent it.

If the engine oil has burned out, it must be solved as soon as possible. At present, there are two popular methods: one is to find a place for overhaul, and the quality of parts and the level of technicians can be guaranteed. If the cost can be borne, you can try, but after overhaul, it will inevitably cause damage to the engine. This is common sense, and the car is not broken, it is repaired!

The second is not to overhaul, because the fundamental reason for burning engine oil is the poor quality of oil and engine oil, which leads to excessive carbon deposition, resulting in a series of problems such as piston ring sticking, cylinder wall wear and oil seal aging. Therefore, these problems can be solved by high-quality cleaning and repair technology. For example, Marti in Germany, which is popular now, can solve the problem of not overhauling the engine oil, fundamentally solve the quality problems of gasoline and engine oil, and ensure that it will not recur in the future.

You can weigh the two for yourself and trust your own judgment.