What skills can I learn from QQ flying?

Hello, I'm Yue Yue. I am very happy to answer this question here today. Today, Yue Yue mainly talks with you about what skills QQ can learn!

First, the most important thing to play QQ is to learn to drift, and then you can learn a lot of skills in skill teaching. It is also important to learn how to run fast! 1 1 cities should master some advanced skills, such as advanced nitrogen bending is necessary, fast bending, tail flick operation, double brake nitrogen cutting, flat ground breaking and double spraying (technically challenging flat ground WCWW operation), and the highest speed of long straight line running out of CWW is the key point, so it is necessary to bend quickly and stick to the curve as much as possible. Next, there are basically explanations in every corner, but some only need advanced nitrogen bending CWW operation.

Second: advanced nitrogen bending fingering: in fact, it is the component of two-stage drift, but this drift trajectory is not interrupted, so it will be easier to understand! The first step is to enter the curve normally, and then when the angle reaches 45 degrees (this angle is not measured clearly, it is about 45 degrees), release the direction key and the drift key at this time (release the direction key only after you are familiar with it, and continue to press the drift key). After release, when the angle is reached, the small jet will naturally light up, but it will not, mostly because the angle is not enough. After the small jet lights up, continue to press it back to drift over the corner, and the front of the car can go over the corner. The most important point here is whether the first small spray can be successfully triggered, and the success is basically done.

Third, the second U-bend, where many extreme running methods are ejection tails, but for those who have just learned advanced, the operation of ejection tails is more difficult, and it is easy to drift and hit the wall here, so it is recommended to use advanced nitrogen bends. These U-bend operations are basically advanced nitrogen outlet CWW. Remember, try to be in a straight line and let the car drive at the highest speed. Talking about a topic, many people press CWW quickly or slowly, which will lead to the car not getting on the top speed. The correct operation of the highest speed is to immediately connect the first small spray after nitrogen, and the second small spray interval is a certain time, about 0.5 seconds, so as to get the highest speed of CWW.

I am very happy to answer your questions in Baidu today. I hope my answer can help you, and you are welcome to discuss it with me here.