How does ps turn purple into yellow?

1 How to turn purple into yellow? Famous image processing software

The steps to solve how to turn purple into yellow in ps are as follows: 1. Open photoshop software and open the picture. You can use the keyboard shortcut "Ctrl+O" to pop up and open the picture window, and double-click or confirm to open it quickly.

2. Open the picture, and we will turn the green grass into Lithospermum step by step. 3. Select "Image-Adjustment-Optional Colors" in the toolbar above photoshop to carefully adjust the specific colors in the image. After clicking, the system will automatically pop up the adjustment window.

4. In the pop-up color adjustment window, you can see that there is a setting bar for color selection at the top and a push-pull setting bar for four colors at the bottom. These two settings can be matched for specific color adjustment. 5. Set the color of the first line first, because we want to change the color of grass, which is mainly composed of "green and yellow", so our color setting should be these two colors.

This solves the problem of how to turn purple into yellow in ps. 6. Let's set the color to "yellow" first, and then push and pull the color below. Let's take purple as an example: purple is composed of red and blue, and blue can be replaced by black, so that we can adjust the green and yellow to the lowest and the red and black to the highest, and then we can complete the modification of yellow.

This solves the problem of how to turn purple into yellow in ps. .

2. How does 2.Photoshop add beautiful yellow and purple shadows?

1. Open the original image, create a new layer, set the foreground color to deep purple: #23 142D, and then darken the bottom area of the image with a soft-edged brush with a transparency of 10%. 2. Create an optional color adjustment layer to adjust yellow and green. The parameter settings are shown in Figure 2 and Figure 3.

This step changes the color of the grass to light yellow. 3. Press Ctrl+Alt+2 to bring up highlight selection, press Ctrl+Shift+I to get dark selection, then create a curve adjustment layer to adjust RGB, green and blue channels. The parameter setting is shown in Figure 5 and the effect is shown in Figure 6.

This step deepens the dark part of the picture and adds a lot of blue and purple. 4. Press Ctrl+J to copy the current curve adjustment layer, and the effect is shown below.

5. Create a new layer, use the lasso tool to tick off the selection below, feather 100 pixels and fill it with blue and purple: #4F286A, and change the blending mode to "color filtering" after canceling the selection, as shown below. 6. Create a new layer, use the lasso tool to tick off the selection below, feather it by 50 pixels, and fill it with light yellow: #E8ECA8. After canceling the selection, change the blending mode to "color filtering", as shown below.

These two steps add highlights to the top area of the picture. 7. Copy the background layer, press Ctrl+Shift+] at the top, and use the pen tool to dig out the characters, as shown below.

8. Create a hue/saturation adjustment layer to reduce the brightness of the whole picture. Parameter settings are shown in figure 1 1. After confirmation, press Ctrl+Alt+G to create a clipping mask, then fill the mask with black, and darken the backlight area of the character with a soft-edged white brush with transparency of 10%. 9. Create a new layer and create a clipping mask. Use a soft-edged brush with a transparency of 10% and draw the left side of the character with a light yellow highlight of 10. Create an optional color adjustment layer and adjust yellow and black. Parameter settings are shown in figures 14 and 15. After confirmation, create a clipping mask, and the effect is as shown in figure 16. This step fine-tunes the highlights and dark colors of the characters.

1 1. Create a new layer, use the lasso tool to tick off the selection as shown below, feather 50 pixels and fill it with light yellow: #E8ECA8, and change the blending mode to "color filtering" after canceling the selection, as shown below. 12. Create a new layer, use the elliptical marquee tool to pull out the selection below, feather 45 pixels and fill it with light yellow: #E8ECA8, and change the blending mode to "color filtering" after canceling the selection, as shown below.

These steps add a light yellow highlight to the picture. 13. Create a curve adjustment layer to adjust RGB, green and blue channels. The parameters and effects are as follows.

This step brightens the dark parts of the picture, adding blue and purple.

3. How to adjust various colors in PS, such as red to green and green to.

None of the people above told you the answer you wanted, and I looked helpless, and I looked helpless at you. I helped you with my meager strength.

I'll tell you the principle.

I don't know what your picture is like. Every picture is different, so the change method is different. I will regard it as a red flower and a green leaf.

The red value is very large, and the green-blue value is very small compared with red, so it is displayed in red.

Idea: Red becomes smaller, blue becomes smaller and green becomes bigger, so red becomes green. If you use other color matching commands to adjust directly, other colors in the picture will change accordingly, so choose the safflower area to change.

Number one: Look at the red channel. The safflower area is particularly bright and the leaf area is relatively dark. You can also use the Levels command to brighten the light and dim it for easy selection. Then ctrl+ click the red channel, and the red channel selection will appear.

Second: Go back to the Layers panel and copy the background, and click the Mask button below. In this way, the red * * * domain is wrapped in a mask.

Third: the mixer selects the red channel to turn down. Turn off the blue channel. The green channel has increased.

It's done. You must handle the details yourself. I can only tell you this. You have to study the usage of the channel mixer yourself, and you won't understand it if I tell you in a few words here.

Optional range: Although the color can be changed, the adjustment degree is very small. Not a good command to change color. Color range: the selection is stiff and the effect is not smooth, which is not a good command to make a selection. Hue saturation: Although you can change the color, it is prone to Matthew effect, so I don't use it often. Color replacement: it can be used to change colors, and it is also prone to Matthew effect. Like hue saturation, the color choices they absorb with straws are rough and rigid. These two commands can be used conveniently and quickly for pictures with a single bright color value level. In fact, it is best to change the color of a single channel, and the adjustment range is also large if the channel mixer changes the single channel. Good command to change colors. You can also change the color in mixed mode by applying the image command. You can also select a good selection by calculating commands, which are all advanced commands using single channel. You should study more.

Photoshop is all about changing channels. Whether you are a master or not depends on whether you can play the channel freely.