What should I use to carve the paper-cut of Yin and Yang?

1. The male sculpture is dominated by lines, and the lines of modeling are retained, and other parts are cut off. The lines are connected, but the shape is also retained and other parts are cut off. This is called orthomorphism. 2. Based on the block, the concave carving cuts off the lines of the characters, and the lines are broken, and the shape is cut empty, which is called negative shape. 3. Yin and Yang sculpture

Combination of male engraving and female engraving.

Tools that traditional paper-cutting needs to prepare:

1 scissors

Step 2 pencil

3. Xuan paper

4. Wax tray

5. Knife for cutting meat

6. Needle and thread

7. Dyes or inks and brushes

8. kerosene lamp

9. Iron

Traditional operation flow

1. Printing and dyeing paper-traditional paper-cutting artists in China will dye the paper with traditional China red with a brush.

2. Hot stamping-After the dyed rice paper is dried, wrinkles usually appear. Use a hot iron to iron wrinkled paper.

3. Make a template-the image of the butterfly below is very simple. Draw the outline of a butterfly with a pencil.

Beautiful butterfly paper-cut

4. Smoked template-Take a piece of paper dyed and prepared by Zhang Gang, wet it, and then press the template on it. Such that one side of the template faces the kerosene lamp. The template and the place where the template is not covered will be blackened by kerosene lamps. When the paper is completely dry, take off the template, and then leave the place where the kerosene lamp is smoked and the blank covered by the template. This is a paper-cut model.

5. Stacking-put the paper-cut samples on a small pile of paper dyed with lewd colors, about 20 pieces, and then seal them together.

6. Paper-cutting-Paper-cutting artists in China usually choose sharp scissors with long handles and short toughness. Use it to cut the one with visible graphics, so that other papers can be cut at the same time. The first is to cut the pattern inside, and the second is to cut the edge outside.

Among all kinds of scissors in China, Yuxian paper-cutting is unique. It is a stippling paper-cut with negative engraving as the main part and positive engraving as the auxiliary part. Its technological process can be divided into the following six processes.

1. Painting: Designers draw patterns according to their own ideas or customers' requirements, which is generally called painting.

Second, the order: sort the painted looks on the rice paper (generally fifty pieces of rice paper at a time are appropriate), and divide them into small pieces with scissors according to the size of the looks.

3. Soak: soak the ordered goods in water and take them out, then squeeze out the water contained in them and dry them in the sun.

4. Carving: Put the soaked goods on the wax board and carve them according to the requirements of the pattern.

5. Dyeing: Coloring the carved products. Raw material coloring and dust removal; Tools are a writing brush and a clean newspaper.

6. Packaging: The products produced by the above five processes are packaged in the form of paper plastic or books, picture frames, gold and platinum.

[1] Laser paper-cutting is to cut paper with a laser cutting machine to form exquisite works of art. Laser paper-cutting is a new product of modern technology, but its finished product is not inferior to the works of traditional artists for decades. At the same time, the use of laser paper-cutting has more advantages in time.