Correct method of sharpening the knife of stainless steel grooving machine

Stainless steel air gouging machine is mainly used in high-end building decoration industry, elevators, shower rooms, splicing security doors, kitchen equipment, signage enterprises, ships, medical equipment and other industries. V-shaped grooving can be carried out on metal plates such as stainless steel sheet, copper plate, aluminum plate, composite aluminum plate and steel plate, so that the arc radius of the edge of the bending workpiece is extremely small, the bending of the plate is clear and beautiful, and the bending force required for bending the plate is reduced.

Operating steps of stainless steel groove planer:

1. Before starting the machine tool, you must carefully check whether the tools, nuts and screws of various parts are firm. If it is found loose, it must be tightened in time.

2. Pay attention to the cutting direction when installing tools, and do not reverse it;

3. The main knife rotates clockwise;

4. Before slotting, confirm whether the pneumatic device is turned on, press the workpiece on the movable push table and lean against the positioning plate, and keep your hands away from the knife edge;

5. When the machine breaks down, cut off the power immediately and stop running. Machine tools shall be maintained and adjusted by special personnel, and the machine tools shall not be operated with diseases.

6, material processing should first check whether there are nails, sand holes, etc. On the cutter, the stainless steel slotting machine prevents the joint of the damaged cutter from flying out and hurting people;

7. When cleaning and wiping the lubricating oil, disassembling and replacing the saw blade, and cleaning the saw blade debris, the power supply of the machine tool must be cut off.

8. The machine tool should be operated, adjusted and maintained by special personnel, and it is strictly forbidden for people who are not familiar with the machine tool to operate;

9, workers should wear earplugs, glasses and other labor insurance supplies when operating.

10. The maintenance of the machine shall be carried out in accordance with the equipment operation, maintenance and maintenance system.