How to Use Redstone Comparator

The usage of Redstone Comparator is as follows:

Tools/materials: RedmiNote 1 1, MIUI 12.5. 18, My World v8.2

1, Redstone comparator 1 * * has two inputs. The two input terminals are the back and side of the ruby comparator respectively. Let's name the back input as A, the side input as B, and the output as C.

2. When there is no input B, the Redstone comparator will transmit the signal input A .. It will not be relayed or attenuated. There is neither a repeater nor a comparator circuit, and the signal strength decays normally, that is, from 15 downward. In the circuit of the repeater, the signal with the intensity of 14 is relayed to 15. In the circuit of the comparator, the signal with the intensity of 14 is still 14 after passing through the comparator without any change.

3. When we right-click the comparator, it will enter the subtraction mode from the comparison mode; These two modes are only useful when both inputs are available.

Redstone comparator uses:

Ruby comparator can be used to detect and measure the intensity of ruby signal. By connecting the input signal to one side of the comparator, you can determine the strength of the input signal and use it in other Redstone circuits. Ruby comparator can be used to detect and judge the number of items in containers (such as boxes, funnels, etc.). By connecting the container and the comparator, other Redstone equipment can be triggered according to the number of articles in the container, and the automatic sorting, distribution and processing of articles can be realized.

Ruby comparator is set next to the regular ruby signal source, which can create ruby clock. Ruby clock can be used to trigger other ruby devices and realize functions such as timer and circulator. Input two ruby signals into ruby comparator, and set it to subtraction mode to realize subtraction operation. This is very useful for complex ruby devices, such as calculators and ruby displays. Ruby comparator can be used as a signal delay, and the transmission time of ruby signal can be delayed by adjusting the settings of the comparator.